להורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy
-
@ע-ה-דכו-ע תודה!
התקנתי, זה - עובד לי, מופיע לי בסייר הקבצים שני דיסקים מקומיים ,והכל תקין.כמובן שאפשר להיכנס לסייר בקבצים שעל הכונן ע"י לחיצה על הקובץ VHDX, מיד לאחר הלחיצה ייתווסף כונן ברשימת הכוננים במחשב זה שמכיל את כל הקבצים של הווינדוס.
לגבי זה - אבדוק.
תודה על העבודה ועל הסבלנות ,נשמח לקבל את זה בווינדוס 11 גם, אם אפשר.
אשריך!נ.ב. מה כוונתך "לי עצמי זה נהיה אוטומטית ברגע שהתקנתי על זה את הווינדוס." התקנת את זה כמו כל התקנה רגילה של ווינדוס?
@יאיר-דניאל כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
נשמח לקבל את זה בווינדוס 11 גם, אם אפשר.
אני אתחיל עכשיו בלי נדר לעשות.
@צול-גאה כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
בטח אתה חושב שאני ממש עוף מוזר-עם 32 סיביות (כמה כאלו יש בכלל??)
(לא חשבת שעוד יש כאלו אה??לגמרי!
אבל אולי בהמשך אני אוכל, צריך בשביל זה להוריד ISO של 32 סיביות, שאלתי כבר את ג'מיני והוא אמר לי שיש ל64 תאימות לאחור.
-
@יאיר-דניאל כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
נשמח לקבל את זה בווינדוס 11 גם, אם אפשר.
אני אתחיל עכשיו בלי נדר לעשות.
@צול-גאה כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
בטח אתה חושב שאני ממש עוף מוזר-עם 32 סיביות (כמה כאלו יש בכלל??)
(לא חשבת שעוד יש כאלו אה??לגמרי!
אבל אולי בהמשך אני אוכל, צריך בשביל זה להוריד ISO של 32 סיביות, שאלתי כבר את ג'מיני והוא אמר לי שיש ל64 תאימות לאחור.
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
אבל אולי בהמשך אני אוכל, צריך בשביל זה להוריד ISO של 32 סיביות,
יש אפשרות ליצור בלי להתקין את הISO על המחשב שלך??
(כי איך תתקין 32 אם המחשב שלך 64??)
תודה רבה -
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
אבל אולי בהמשך אני אוכל, צריך בשביל זה להוריד ISO של 32 סיביות,
יש אפשרות ליצור בלי להתקין את הISO על המחשב שלך??
(כי איך תתקין 32 אם המחשב שלך 64??)
תודה רבה@צול-גאה כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
אבל אולי בהמשך אני אוכל, צריך בשביל זה להוריד ISO של 32 סיביות,
יש אפשרות ליצור בלי להתקין את הISO על המחשב שלך??
(כי איך תתקין 32 אם המחשב שלך 64??)
תודה רבה@צול-גאה כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
אבל אולי בהמשך אני אוכל, צריך בשביל זה להוריד ISO של 32 סיביות,
יש אפשרות ליצור בלי להתקין את הISO על המחשב שלך??
(כי איך תתקין 32 אם המחשב שלך 64??)
תודה רבהכבר עניתי על זה.
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
עריכה: יש אפשרות בכלל? המחשב שלי 64
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
שאלתי כבר את ג'מיני והוא אמר לי שיש ל64 תאימות לאחור.
-
@צול-גאה כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
אבל אולי בהמשך אני אוכל, צריך בשביל זה להוריד ISO של 32 סיביות,
יש אפשרות ליצור בלי להתקין את הISO על המחשב שלך??
(כי איך תתקין 32 אם המחשב שלך 64??)
תודה רבה@צול-גאה כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
אבל אולי בהמשך אני אוכל, צריך בשביל זה להוריד ISO של 32 סיביות,
יש אפשרות ליצור בלי להתקין את הISO על המחשב שלך??
(כי איך תתקין 32 אם המחשב שלך 64??)
תודה רבהכבר עניתי על זה.
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
עריכה: יש אפשרות בכלל? המחשב שלי 64
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
שאלתי כבר את ג'מיני והוא אמר לי שיש ל64 תאימות לאחור.
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
כבר עניתי על זה.
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
אבל אולי בהמשך אני אוכל,
אבל זה מה שרציתי לעשות לך על שניהם
-
@מנעמע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
אלא על המחשב עצמו כמערכת הפעלה משנית
איך???
לי עצמי זה נהיה אוטומטית ברגע שהתקנתי על זה את הווינדוס.
אבל הצורה לעשות את זה ידנית אמורה להיות כך:
דבר ראשון צריך לטעון את הדיסק ע"י לחיצה על הקובץ VHDX, זה יוסיף במחשב זה כונן נוסף.
אח"כ צריך לפתוח CMD (מסתבר שכמנהל דווקא) ולהריץ את הפקודות הבאות להחליף את X לאות הכונן של הVHDX (או להחליף את אות הכונן בניהול דיסקים לX, מומלץ יותר שזה יהיה אות לא בתחילת הABC) :CD X:\Windows\System32
כדי להיכנס לתיקיה של הכונן. ואח"כ להריץ בתיקיה הזו
bcdboot X:\Windows /s S: /f UEFI
לאחמ"כ כאשר מפעילים את המערכת הפעלה בצורה רגילה ייפתח תפריט של בחירה מאיזו מערכת לאתחל למשך 30 שניות או יותר ולאחמ"כ אם לא תיבחר מערכת יאותחל המערכת ברירת מחדל.
ניסית את כל הגירסאות של התוסף?
בתיעוד הרשמי של ונטוי כתוב שהוא תומך בקבצי VHDX בגודל דינמי, אבל ראיתי בפורום שלהם שיש כמה שטוענים שזה עובד רק על גודל קבוע, אז אם עדיין לא הסתדר לך אולי זו הבעיה.@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
דבר ראשון צריך לטעון את הדיסק ע"י לחיצה על הקובץ VHDX, זה יוסיף במחשב זה כונן נוסף.
הוא טוען שקובץ תמונת הדיסק פגום מה זה אומר??
ניסיתי להוריד שוב ולחלץ שוב-בסוף החילוץ הוא כותב לי ככה
! F:\Win10_22H2_Hebrew_x64.7z: שגיאת סיכום ביקורת בקובץ המוצפן E:\תיקיה חדשה\Win10_22H2_Hebrew_x64.vhdx. קובץ פגום או סיסמה שגויה.
(הסיסמה שעשיתי היא 1234-כמו שכתבת קודם) -
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
דבר ראשון צריך לטעון את הדיסק ע"י לחיצה על הקובץ VHDX, זה יוסיף במחשב זה כונן נוסף.
הוא טוען שקובץ תמונת הדיסק פגום מה זה אומר??
ניסיתי להוריד שוב ולחלץ שוב-בסוף החילוץ הוא כותב לי ככה
! F:\Win10_22H2_Hebrew_x64.7z: שגיאת סיכום ביקורת בקובץ המוצפן E:\תיקיה חדשה\Win10_22H2_Hebrew_x64.vhdx. קובץ פגום או סיסמה שגויה.
(הסיסמה שעשיתי היא 1234-כמו שכתבת קודם)@מנעמע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
דבר ראשון צריך לטעון את הדיסק ע"י לחיצה על הקובץ VHDX, זה יוסיף במחשב זה כונן נוסף.
הוא טוען שקובץ תמונת הדיסק פגום מה זה אומר??
ניסיתי להוריד שוב ולחלץ שוב-בסוף החילוץ הוא כותב לי ככה
! F:\Win10_22H2_Hebrew_x64.7z: שגיאת סיכום ביקורת בקובץ המוצפן E:\תיקיה חדשה\Win10_22H2_Hebrew_x64.vhdx. קובץ פגום או סיסמה שגויה.
(הסיסמה שעשיתי היא 1234-כמו שכתבת קודם)עם איזה תוכנה חילצת?
-
@מנעמע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
דבר ראשון צריך לטעון את הדיסק ע"י לחיצה על הקובץ VHDX, זה יוסיף במחשב זה כונן נוסף.
הוא טוען שקובץ תמונת הדיסק פגום מה זה אומר??
ניסיתי להוריד שוב ולחלץ שוב-בסוף החילוץ הוא כותב לי ככה
! F:\Win10_22H2_Hebrew_x64.7z: שגיאת סיכום ביקורת בקובץ המוצפן E:\תיקיה חדשה\Win10_22H2_Hebrew_x64.vhdx. קובץ פגום או סיסמה שגויה.
(הסיסמה שעשיתי היא 1234-כמו שכתבת קודם)עם איזה תוכנה חילצת?
@ע-ה-דכו-ע WINRAR
-
@ע-ה-דכו-ע WINRAR
-
-
@יאיר-דניאל כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
@ע-ה-דכו-ע זה יושב על דיסק און קי של 64, אבל יש לי את זה גם על דיסק אונקי אחר של טרה...
כל עוד יש לך מקום פנוי לא מומלץ להקטין.
כמובן זה דורש את כל המקום רק כאשר מפעילים עליו את הווינדוס, כאשר הוא רק מונח בכונן, ואפילו כאשר נכנסים אליו מתוך מערכת הפעלה אחרת ע"י לחיצה כפולה, הוא תופס רק את המקום של הקבצים בתוכו.
השתמשת ע"י VENTOY, נכון? כי ל @מנעמע זה לא עבד, ואני לא ניסיתי, אני אשמח לדעת שזה עובד גם בונטוי.
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
השתמשת ע"י VENTOY, נכון? כי ל @מנעמע זה לא עבד, ואני לא ניסיתי, אני אשמח לדעת שזה עובד גם בונטוי.
השתמשתי ע"י ונטוי, כן, ועובד מצויין - חוץ מהעניין שאני לא מצליח בשופ"א להיכנס למערכת ההפעלה שיושבת על הדיסק און קי, עשיתי כמו שאמרת כאן, וזה מה שכתוב לי בCMD:
C:\Windows\System32>CD Q\Windows\System32 The system cannot find the path specified. C:\Windows\System32> C:\Windows\System32>bcdboot Q:\Windows s/ S: /f uefi Bcdboot - Bcd boot file creation and repair tool. The bcdboot.exe command-line tool is used to copy critical boot files to the system partition and to create a new system BCD store. bcdboot <source> [/l <locale>] [/s <volume-letter> [/f <firmware>]] [/v] [/vbcd] [/m [{OS Loader ID}]] [/addlast] [/p] [/c] [/nofirmwaresync] [/description <description>] source Specifies the location of the windows system root. /l Specifies an optional locale parameter to use when initializing the BCD store. The default is US English. /s Specifies an optional volume letter parameter to designate the target system partition where boot environment files are copied. The default is the system partition identified by the firmware. /v Enables verbose mode. /vbcd Enables BCD logging. /m If an OS loader GUID is provided, this option merges the given loader object with the system template to produce a bootable entry. Otherwise, only global objects are merged. /d Specifies that the existing default windows boot entry should be preserved. /f Used with the /s command, specifies the firmware type of the target system partition. Options for <firmware> are 'UEFI', 'BIOS', or 'ALL'. /t Used with the /s and /f commands, specifies a target directory under the system partition where the boot environment files are to be copied. By default, the boot environment files are copied to the root of the target system partition. /addlast Specifies that the windows boot manager firmware entry should be added last. The default behavior is to add it first. /nofirmwaresync Disable synchronization with firmware. /bcdclean Clean the BCD Store. By default, simply removes any duplicate entries in the BCD. Can be followed by 'full'. In this case, each entry is scanned. If the corresponding device for that entry does not exist, the entry is deleted. /p Specifies that the windows boot manager firmware entry position should be preserved. If entry does not exist, new entry will be added in the first position. /c Specifies that any existing objects described by the template should not be migrated. /imageroot Specifies an image root under from the boot files originate. The bcd store of this image needs to be constructed with paths relative to the root of the image. /bootex Use the bootex binaries for servicing if necessary conditions are met. /offline Forces boot file servicing to be handled in an offline manner. Boot file selection is forced based on presence of 'bootex' switch. Examples: bcdboot c:\windows /l en-us bcdboot c:\windows /s h: bcdboot c:\windows /s h: /f UEFI bcdboot c:\windows /s h: /f UEFI /t Configuration\Boot bcdboot c:\windows /m {d58d10c6-df53-11dc-878f-00064f4f4e08} bcdboot c:\windows /d /addlast bcdboot c:\windows /p bcdboot C:\Images\ImageRoot\Files\Windows /f UEFI /imageroot C:\Images\ImageRoot\Files
אבל הוא נותן לי אפשרות לבחור לאיזו מערכת הפעלה להיכנס - לא עזר לא כיבוי ולא הפעלה מחדש אחרי זה.
-
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
השתמשת ע"י VENTOY, נכון? כי ל @מנעמע זה לא עבד, ואני לא ניסיתי, אני אשמח לדעת שזה עובד גם בונטוי.
השתמשתי ע"י ונטוי, כן, ועובד מצויין - חוץ מהעניין שאני לא מצליח בשופ"א להיכנס למערכת ההפעלה שיושבת על הדיסק און קי, עשיתי כמו שאמרת כאן, וזה מה שכתוב לי בCMD:
C:\Windows\System32>CD Q\Windows\System32 The system cannot find the path specified. C:\Windows\System32> C:\Windows\System32>bcdboot Q:\Windows s/ S: /f uefi Bcdboot - Bcd boot file creation and repair tool. The bcdboot.exe command-line tool is used to copy critical boot files to the system partition and to create a new system BCD store. bcdboot <source> [/l <locale>] [/s <volume-letter> [/f <firmware>]] [/v] [/vbcd] [/m [{OS Loader ID}]] [/addlast] [/p] [/c] [/nofirmwaresync] [/description <description>] source Specifies the location of the windows system root. /l Specifies an optional locale parameter to use when initializing the BCD store. The default is US English. /s Specifies an optional volume letter parameter to designate the target system partition where boot environment files are copied. The default is the system partition identified by the firmware. /v Enables verbose mode. /vbcd Enables BCD logging. /m If an OS loader GUID is provided, this option merges the given loader object with the system template to produce a bootable entry. Otherwise, only global objects are merged. /d Specifies that the existing default windows boot entry should be preserved. /f Used with the /s command, specifies the firmware type of the target system partition. Options for <firmware> are 'UEFI', 'BIOS', or 'ALL'. /t Used with the /s and /f commands, specifies a target directory under the system partition where the boot environment files are to be copied. By default, the boot environment files are copied to the root of the target system partition. /addlast Specifies that the windows boot manager firmware entry should be added last. The default behavior is to add it first. /nofirmwaresync Disable synchronization with firmware. /bcdclean Clean the BCD Store. By default, simply removes any duplicate entries in the BCD. Can be followed by 'full'. In this case, each entry is scanned. If the corresponding device for that entry does not exist, the entry is deleted. /p Specifies that the windows boot manager firmware entry position should be preserved. If entry does not exist, new entry will be added in the first position. /c Specifies that any existing objects described by the template should not be migrated. /imageroot Specifies an image root under from the boot files originate. The bcd store of this image needs to be constructed with paths relative to the root of the image. /bootex Use the bootex binaries for servicing if necessary conditions are met. /offline Forces boot file servicing to be handled in an offline manner. Boot file selection is forced based on presence of 'bootex' switch. Examples: bcdboot c:\windows /l en-us bcdboot c:\windows /s h: bcdboot c:\windows /s h: /f UEFI bcdboot c:\windows /s h: /f UEFI /t Configuration\Boot bcdboot c:\windows /m {d58d10c6-df53-11dc-878f-00064f4f4e08} bcdboot c:\windows /d /addlast bcdboot c:\windows /p bcdboot C:\Images\ImageRoot\Files\Windows /f UEFI /imageroot C:\Images\ImageRoot\Files
אבל הוא נותן לי אפשרות לבחור לאיזו מערכת הפעלה להיכנס - לא עזר לא כיבוי ולא הפעלה מחדש אחרי זה.
@יאיר-דניאל כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
למערכת ההפעלה שיושבת על הדיסק און קי
אתה רוצה להוסיף לאתחול של המחשב את הדיסק אונקי? בעיקרון אני דיברתי על מקרה שהקובץ נמצא בדיסק קשיח, אבל באמת זה גם אמור להתאפשר.
בשורה הראשונה הסיבה לשגיאה היא מכיון ששכחת נקודותיים אחרי אות הכונן.
זה שההמשך לא עבד, אני לא יודע בדיוק אם זה באמת היה אמור לעבוד, כי כאמור לא ניסיתי, אבל עכשיו ג'מיני מצא לי תוכנה שאמורה לעשות את זה יותר בקלות עם ממשק משתמש, כבר אני אעלה אותה בלי נדר.
אגב, את הפוסט הזה כתבתי מתוך הווינדוס 11 בVHDX, כבר אני אגמור להכין, ואלה את זה בלי נדר.
-
@ע-ה-דכו-ע אני מנסה להתקין את זיפ 7 ו
ובתרגום לעבריתעריכה הורדתי לבד מכאן מחלץ
-
@ע-ה-דכו-ע לא זה כותב סיסמה שגויה
-
@ע-ה-דכו-ע לא זה כותב סיסמה שגויה
@מנעמע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
@ע-ה-דכו-ע לא זה כותב סיסמה שגויה
בדקתי את זה שוב, הסיסמה היא 1234, אצלי זה עובד.
-
@מנעמע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
@ע-ה-דכו-ע לא זה כותב סיסמה שגויה
בדקתי את זה שוב, הסיסמה היא 1234, אצלי זה עובד.
@ע-ה-דכו-ע אני מנסה שוב
תודה רבהעריכה הצליח תודה רבה!!
-
@ע-ה-דכו-ע כתב בלהורדה | ווינדוס 10 להפעלה ניידת באמצעות ventoy:
השתמשת ע"י VENTOY, נכון? כי ל @מנעמע זה לא עבד, ואני לא ניסיתי, אני אשמח לדעת שזה עובד גם בונטוי.
השתמשתי ע"י ונטוי, כן, ועובד מצויין - חוץ מהעניין שאני לא מצליח בשופ"א להיכנס למערכת ההפעלה שיושבת על הדיסק און קי, עשיתי כמו שאמרת כאן, וזה מה שכתוב לי בCMD:
C:\Windows\System32>CD Q\Windows\System32 The system cannot find the path specified. C:\Windows\System32> C:\Windows\System32>bcdboot Q:\Windows s/ S: /f uefi Bcdboot - Bcd boot file creation and repair tool. The bcdboot.exe command-line tool is used to copy critical boot files to the system partition and to create a new system BCD store. bcdboot <source> [/l <locale>] [/s <volume-letter> [/f <firmware>]] [/v] [/vbcd] [/m [{OS Loader ID}]] [/addlast] [/p] [/c] [/nofirmwaresync] [/description <description>] source Specifies the location of the windows system root. /l Specifies an optional locale parameter to use when initializing the BCD store. The default is US English. /s Specifies an optional volume letter parameter to designate the target system partition where boot environment files are copied. The default is the system partition identified by the firmware. /v Enables verbose mode. /vbcd Enables BCD logging. /m If an OS loader GUID is provided, this option merges the given loader object with the system template to produce a bootable entry. Otherwise, only global objects are merged. /d Specifies that the existing default windows boot entry should be preserved. /f Used with the /s command, specifies the firmware type of the target system partition. Options for <firmware> are 'UEFI', 'BIOS', or 'ALL'. /t Used with the /s and /f commands, specifies a target directory under the system partition where the boot environment files are to be copied. By default, the boot environment files are copied to the root of the target system partition. /addlast Specifies that the windows boot manager firmware entry should be added last. The default behavior is to add it first. /nofirmwaresync Disable synchronization with firmware. /bcdclean Clean the BCD Store. By default, simply removes any duplicate entries in the BCD. Can be followed by 'full'. In this case, each entry is scanned. If the corresponding device for that entry does not exist, the entry is deleted. /p Specifies that the windows boot manager firmware entry position should be preserved. If entry does not exist, new entry will be added in the first position. /c Specifies that any existing objects described by the template should not be migrated. /imageroot Specifies an image root under from the boot files originate. The bcd store of this image needs to be constructed with paths relative to the root of the image. /bootex Use the bootex binaries for servicing if necessary conditions are met. /offline Forces boot file servicing to be handled in an offline manner. Boot file selection is forced based on presence of 'bootex' switch. Examples: bcdboot c:\windows /l en-us bcdboot c:\windows /s h: bcdboot c:\windows /s h: /f UEFI bcdboot c:\windows /s h: /f UEFI /t Configuration\Boot bcdboot c:\windows /m {d58d10c6-df53-11dc-878f-00064f4f4e08} bcdboot c:\windows /d /addlast bcdboot c:\windows /p bcdboot C:\Images\ImageRoot\Files\Windows /f UEFI /imageroot C:\Images\ImageRoot\Files
אבל הוא נותן לי אפשרות לבחור לאיזו מערכת הפעלה להיכנס - לא עזר לא כיבוי ולא הפעלה מחדש אחרי זה.
תוריד את התוכנה הזו EasyBCD 2.4.exe
צריך להתקין, להפעיל, יש אפשרות לבחור עברית.אח"כ לוחצים בצד שמאל על "רשומה חדש" (התרגום לא משהו) בוחרים שם תצוגה ונתיב לקובץ, ויוצרים את הרשומה.
בעיקרון התוכנה הזו תומכת יותר בVHD, שזה הסוג הישן של VHDX, אבל היא אמורה להצליח גם VHDX, אם לא יש אפשרות דרך שורת הפקודה, אבל זה הרבה יותר מסובך, כמו שכבר ניסית, וגם עכשיו ראיתי שזה אולי יותר מסובך ממה שכתבתי בהתחלה.