עזרה | בריק שיאומי F22 פרו

C:\Users\pisga\mtkclient>python mtk wl C:\Users\pisga\Downloads\1234\ROM2
MTK Flash/Exploit Client V1.6.3 (c) B.Kerler 2018-2023

Preloader - Status: Waiting for PreLoader VCOM, please connect mobile

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.


...........
Port - Device detected :)
Preloader -     CPU:                    MT6768/MT6769(Helio P65/G85 k68v1)
Preloader -     HW version:             0x0
Preloader -     WDT:                    0x10007000
Preloader -     Uart:                   0x11002000
Preloader -     Brom payload addr:      0x100a00
Preloader -     DA payload addr:        0x201000
Preloader -     CQ_DMA addr:            0x10212000
Preloader -     Var1:                   0x25
Preloader - Disabling Watchdog...
Preloader - HW code:                    0x707
Preloader - Target config:              0xe0
Preloader -     SBC enabled:            False
Preloader -     SLA enabled:            False
Preloader -     DAA enabled:            False
Preloader -     SWJTAG enabled:         False
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required:     False
Preloader -     Mem read auth:          True
Preloader -     Mem write auth:         True
Preloader -     Cmd 0xC8 blocked:       True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader -     HW subcode:             0x8a00
Preloader -     HW Ver:                 0xca00
Preloader -     SW Ver:                 0x0
Preloader - ME_ID:                      9D55F90C0F32C058D6836695D334CB74
Preloader - SOC_ID:                     1D56585400CF0027069E91EE92AD5DF8F0674B9F287A48B428A147A90EB29FBB
DA_handler - Device is unprotected.
DA_handler - Device is in BROM-Mode. Bypassing security.
PLTools - Loading payload from mt6768_payload.bin, 0x264 bytes
Exploitation - Kamakiri Run
Exploitation - Done sending payload...
PLTools - Successfully sent payload: C:\Users\pisga\mtkclient\mtkclient\payloads\mt6768_payload.bin
Port - Device detected :)
DA_handler
DA_handler - [LIB]: ←[33mDevice is in BROM mode. No preloader given, trying to dump preloader from ram.←[0m
Successfully extracted preloader for this device to: preloader_agn_1244ro_mt6769s_mx6432.bin
DAXFlash - Uploading xflash stage 1 from MTK_AllInOne_DA_5.2228.bin
xflashext - Patching da1 ...
Mtk - Patched "Patched loader msg" in preloader
Mtk - Patched "hash_check" in preloader
xflashext
xflashext - [LIB]: ←[33mError on patching da1 version check...←[0m
Mtk - Patched "Patched loader msg" in preloader
Mtk - Patched "get_vfy_policy" in preloader
xflashext - Patching da2 ...
DAXFlash - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXFlash - Successfully received DA sync
DAXFlash - Sending emi data ...
DAXFlash - DRAM setup failed: unpack requires a buffer of 12 bytes

אני אני אני

@linux-i
דבר ראשון לא ראיתי שגיאה
דבר שני הפקודה היא python mtk wo 0x0 לאחריה גודל זיכרון המכשיר (נראה לי זה 0xE8F800000) ואח"כ נתיב הקובץ

 python mtk wo 0x0 0xE8F800000 C:\Users\pisga\Downloads\1234\ROM2

linux i

@אני-אני-אני תודה רבה אני ינסה ויעדכן

linux i


C:\Users\pisga\mtkclient>python mtk wo 0x0 0xE8F800000 C:\Users\pisga\Downloads\1234\ROM2
MTK Flash/Exploit Client V1.6.3 (c) B.Kerler 2018-2023

Preloader - Status: Waiting for PreLoader VCOM, please connect mobile

Port - Hint:

Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.


...........
Port - Device detected :)
Preloader -     CPU:                    MT6768/MT6769(Helio P65/G85 k68v1)
Preloader -     HW version:             0x0
Preloader -     WDT:                    0x10007000
Preloader -     Uart:                   0x11002000
Preloader -     Brom payload addr:      0x100a00
Preloader -     DA payload addr:        0x201000
Preloader -     CQ_DMA addr:            0x10212000
Preloader -     Var1:                   0x25
Preloader - Disabling Watchdog...
Preloader - HW code:                    0x707
Preloader - Target config:              0xe0
Preloader -     SBC enabled:            False
Preloader -     SLA enabled:            False
Preloader -     DAA enabled:            False
Preloader -     SWJTAG enabled:         False
Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:  False
Preloader -     Root cert required:     False
Preloader -     Mem read auth:          True
Preloader -     Mem write auth:         True
Preloader -     Cmd 0xC8 blocked:       True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader -     HW subcode:             0x8a00
Preloader -     HW Ver:                 0xca00
Preloader -     SW Ver:                 0x0
Preloader - ME_ID:                      9D55F90C0F32C058D6836695D334CB74
Preloader - SOC_ID:                     1D56585400CF0027069E91EE92AD5DF8F0674B9F287A48B428A147A90EB29FBB
DA_handler - Device is unprotected.
DA_handler - Device is in BROM-Mode. Bypassing security.
PLTools - Loading payload from mt6768_payload.bin, 0x264 bytes
Exploitation - Kamakiri Run
Exploitation - Done sending payload...
PLTools - Successfully sent payload: C:\Users\pisga\mtkclient\mtkclient\payloads\mt6768_payload.bin
Port - Device detected :)
DA_handler
DA_handler - [LIB]: ←[33mDevice is in BROM mode. No preloader given, trying to dump preloader from ram.←[0m
DAXFlash - Uploading xflash stage 1 from MTK_AllInOne_DA_5.2228.bin
xflashext - Patching da1 ...
Mtk - Patched "Patched loader msg" in preloader
Mtk - Patched "hash_check" in preloader
xflashext
xflashext - [LIB]: ←[33mError on patching da1 version check...←[0m
Mtk - Patched "Patched loader msg" in preloader
Mtk - Patched "get_vfy_policy" in preloader
xflashext - Patching da2 ...
DAXFlash - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXFlash - Successfully received DA sync
DAXFlash - Sending emi data ...
DAXFlash - DRAM setup failed: unpack requires a buffer of 12 bytes

C:\Users\pisga\mtkclient>

הוא לא מתחיל לצרוב

אני אני אני

@linux-i
איך המכשיר שלך נכנס לבריק?
כי אני חושב אולי לנסות לצרוב מחיצות בודדות במצב הורדה בלבד יעזור

linux i

@אני-אני-אני ניסיתי לצרוב גרסה שהורדתי מ XDA ובסיום התהליך אחרי הV הירוק המכשיר פשוט לא נדלק