מדריך | VoLTE במכשיר Qin F21 Pro - בדרך פשוטה יותר ללא צורך במודול קבוע-אפשר להסיר רוט לאחר מכן (עודכן לעבוד גם עם HOT MOBILE)
עזרה הדדית - שיאומי f21 pro ו +f21 pro
896
פוסטים
77
כותבים
29.5k
צפיות
61
עוקבים
-
@שניאור-שמח אני לא הבנתי כי האפליקציה או הסקריפט או המודול כולם כבר עושים את זה, אז למה לא עבד לו?
-
שלום
אני חדש בכל הנושא הזה...
אם יש לי 4G וכשאני מתקשר זה יורד ל 3G זה בסדר?
כי השיחות עובד לי טוב, או שהחוק עוד לא בתוקף? -
@dudu @נוחעם-FM @lilo159 עדכון האפליקציה, המודול והסקריפט עם תמיכה לשיחת ועידה (בחלק מהמכשירים יש להפעיל את המכשיר מחדש לאחר הפעלתם):
האפליקציה המעודכנת(יש לחלץ מהזיפ ולהתקין): volte-appconfv3.zip
המודול המעודכן (יש להתקין כמודול במגיסק) : kosher-volte-module-confv2.zip
הסקריפט המעודכן (יש לחלץ מהזיפ) : volteconf-script.zip
אם אנשים יכתבו פה שזה עובד להם, (עשיתי כמה שינויים חשובים אני רוצה לוודא שזה עובד) אחליף אותם בפוסט הראשי.ומי שרוצה את הקוד של הסקריפט המעודכן בהעתק הדבק:
#!/system/bin-sh # # --- Comprehensive VoLTE & IMS Enabler Script for MTK Devices (v4) --- # # This script uses a systemless approach to enable VoLTE. # IT DOES NOT MODIFY THE /system PARTITION. # # 1. Sets persistent system properties for VoLTE/VoWiFi. # 2. Dynamically gets the current carrier's information. # 3. Checks if an IMS APN already exists in the live database. # 4. If missing, inserts the IMS APN directly using the Content Provider. # 5. Sends AT commands to the modem to enable VoLTE. # 6. Conditionally applies the SGS SMS fix ONLY for the Cellcom network. # # Must be run as root. # echo "--- Comprehensive VoLTE & IMS Enabler (v4 - Systemless) ---" echo "" # --- 0. PRE-FLIGHT CHECK --- if [ "$(id -u)" -ne 0 ]; then echo "[ERROR] This script must be run as root. Please run 'su' first." exit 1 fi # --- 1. SETTING SYSTEM PROPERTIES --- echo "[STEP 1] Setting persistent system properties for VoLTE/VoWiFi..." setprop persist.vendor.mtk.volte.enable 1 setprop persist.vendor.radio.volte_state 1 setprop persist.vendor.mtk.wfc.enable 1 setprop persist.dbg.volte_avail_ovr 1 setprop persist.vendor.radio.selfreg 1 setprop persist.vendor.service.atci.pct.mode 1 setprop persist.vendor.mtk_dynamic_ims_switch 0 echo "--> System properties set successfully." echo "" # --- 2. DYNAMICALLY ADDING IMS APN VIA CONTENT PROVIDER --- echo "[STEP 2] Checking and adding IMS APN to live database..." # Get the MCC/MNC from the active SIM card OPERATOR_NUMERIC=$(getprop gsm.sim.operator.numeric) if [ -z "$OPERATOR_NUMERIC" ]; then echo "[WARNING] Could not detect SIM operator. Skipping APN insertion." else MCC=${OPERATOR_NUMERIC:0:3} MNC=${OPERATOR_NUMERIC:3} echo "[INFO] Detected Operator: MCC=$MCC, MNC=$MNC" # Check if an IMS APN already exists for this operator to avoid duplicates IMS_EXISTS=$(content query --uri content://telephony/carriers --where "numeric = '$OPERATOR_NUMERIC' AND type LIKE '%ims%'" | grep -c "Row:") if [ "$IMS_EXISTS" -gt 0 ]; then echo "--> IMS APN already exists for this operator. No action needed." else echo "--> IMS APN not found. Inserting into database..." content insert --uri content://telephony/carriers \ --bind name:s:ims \ --bind apn:s:ims \ --bind mcc:s:$MCC \ --bind mnc:s:$MNC \ --bind numeric:s:$OPERATOR_NUMERIC \ --bind type:s:ims \ --bind protocol:s:IPV4V6 \ --bind roaming_protocol:s:IPV4V6 \ --bind carrier_enabled:i:1 >/dev/null 2>&1 echo "--> IMS APN has been added successfully." fi fi echo "" # --- 3. TRIGGERING THE MODEM WITH AT COMMANDS --- echo "[STEP 3] Finding modem and sending AT command sequence..." PID=$(pidof mtkfusionrild) if [ -z "$PID" ]; then echo "[ERROR] Could not find mtkfusionrild process. Skipping AT commands." else TTY_LIST=$(lsof -p "$PID" | grep /dev/pts | awk '{print $NF}' | sort -u) RESPONSIVE_TTY="" for TTY in $TTY_LIST; do echo -e "AT\\r" > "$TTY" sleep 0.3 if [ -n "$(timeout 1 cat "$TTY" | grep OK)" ]; then RESPONSIVE_TTY=$TTY break fi done if [ -z "$RESPONSIVE_TTY" ]; then echo "[FAILURE] Could not find a responsive AT command TTY port." else echo "[SUCCESS] Found responsive TTY at: $RESPONSIVE_TTY" echo "[INFO] Sending VoLTE trigger and conditional SMS Fix..." #Turns off the MNCMCC Check echo -e "AT+ECFGSET=\"mncmcc_pass_flag\",\"0\"\\r" > "$RESPONSIVE_TTY" sleep 0.5 # The confirmed Trigger Command echo -e "AT+ECFGSET=\"operator_code\",\"232\"\\r" > "$RESPONSIVE_TTY" sleep 0.5 # Conditional SGS Command for SMS compatibility ONLY on Cellcom (MNC 02) if [ "$MNC" = "02" ]; then echo "[INFO] Cellcom network detected. Applying SGS SMS Fix..." echo -e "AT+ECFGSET=\"sdm_profile_prefer_sms_over_sgs_to_ims\",\"1\"\\r" > "$RESPONSIVE_TTY" sleep 0.5 fi # The "Apply" Command to save all settings echo -e "AT+EIMSCFG=1,0,0,0,1,1\\r" > "$RESPONSIVE_TTY" sleep 0.5 # Clear the buffer timeout 1 cat "$RESPONSIVE_TTY" > /dev/null echo "--> VoLTE AT command sequence sent successfully." echo "Turning On Volte Calls In The Settings.." settings put global volte_vt_enabled 1 fi fi echo "" # --- 4. FINAL INSTRUCTIONS --- echo "--- SCRIPT FINISHED ---" echo "All VoLTE enablement steps have been completed." echo "The VoLTE icon should appear shortly. For changes to take full effect, a REBOOT is still recommended." echo "-----------------------" -
תסביר לי למען ה איך אתה עושה את הניסים האלו???
מי שהמציא את האנדרואיד יודע על האפשרויות האלו בכלל
הזיה
תודה רבה אני חוזר להכנות לשבת
 { const baseUrl = "https://www.google.co.il/search?q=site:mitmachim.top"; const m = location.pathname.match(/^\/(topic|category)\/(\d+)/); const type = m ? m[1] : null; const id = m ? m[2] : null; let searchInput; function search(path = "") { const query = searchInput.value.trim(); if (query) { window.open(`${baseUrl}${path}%20${encodeURIComponent(query)}`, "_blank"); } } let buttons = {}; buttons.searchAll = { id: "bb-search-all", label: `חיפוש ${type ? "בכל הפורום" : ""}`, className: type ? "btn-secondary" : "btn-primary", callback: () => search(), }; if (type === "topic") { buttons.searchTopic = { label: "חיפוש בנושא זה", className: "btn-primary", callback: () => search(`/topic/${id}`), }; } else if (type === "category") { buttons.searchCategory = { label: "חיפוש בקטגוריה זו", className: "btn-primary", callback: () => search(`/category/${id}`), }; } buttons.cancel = { label: "ביטול", className: "btn-default", "data-bs-dismiss": "modal" }; const dialog = bootbox.dialog({ title: '<div style="text-align:center;"><img src="/assets/uploads/files/1625950269825-mt-google.png" width="400" alt="חיפוש בגוגל"></div>', message: '<input id="bb-inp" class="bootbox-input bootbox-input-text form-control" placeholder="הקלידו כדי לחפש בגוגל" autocomplete="off"/>', buttons, backdrop: true, show: true, onEscape: true }); dialog.on("shown.bs.modal", function () { searchInput = document.getElementById("bb-inp"); if (searchInput) { searchInput.focus(); searchInput.addEventListener("keydown", function (e) { if (e.key === "Enter") { e.preventDefault(); const query = this.value.trim(); if (query) { search(); dialog.modal("hide"); } } else if (e.key === "Escape") { e.preventDefault(); dialog.modal("hide"); } }); } const searchAllButton = document.getElementById("bb-search-all"); if (searchAllButton) { searchAllButton.title = "לחצו על אנטר כדי לחפש"; } }); })(); void 0;){kind=link}